Help on some basics circuit hook up

[j1ceasar]

Help please !

I have a dfrobot stepper motor controller that Iwant to power with a ac/dc converter its a standard s-50-12 unit

The stepper motors are already hooked up but I am not positive about the power imputs to the controller from the converter .

The controller has
marked input VCC ( diagram shows red wire )
Marked input GRND ( diagram shows Black wire )

The ac/dc converter has
LINE IN AC (L)
LINE IN AC (N)
GROUND SYMBOL
THEN
-V
+V



https://www.dfrobot.com/index.php?route=product/product&search=xbee&description=true&product_id=1060

https://www.cdiweb.com/ProductDetai...9G3_Vfh3poD9uDqJ-OsPXLoN_Q43TbhdRdBoCqInw_wcB

thanks folks Really appreciate it !

 

[davenn]

hi ya

welcome

your images didn't upload

 

[j1ceasar]

Links are to the images.

 

[davenn]

but I am not positive about the power imputs to the controller from the converter .

so I assume then that you surely must have downloaded the datasheet for the controller ?
it will tell all you need .... they are available on that site