Hobbyist electronic schematics editor / simulator

[Mortel]

Hi folks,

I would like to know wich schematics editor and/or simulator you use wich
is free. I looked forward to find a GOOD one and all the acceptable things
I found were professional tools wich were time-limited licences. I could
find a pirate version of these but it's not my philosophy. So if some
people out there have suggestions, thanks in advance !

cheers,

J-F

 

[BobGardner]

I would like to know wich schematics editor and/or simulator you use wich

is free.

Eagle (cadsoft.com)

 

[Terry Pinnell]

Hi folks,

I would like to know wich schematics editor and/or simulator you use wich
is free. I looked forward to find a GOOD one and all the acceptable things
I found were professional tools wich were time-limited licences. I could
find a pirate version of these but it's not my philosophy. So if some
people out there have suggestions, thanks in advance !

cheers,

J-F

Have you worked your way through my notes and links to some 60 ECAD
programs here?
http://www.terrypin.dial.pipex.com/ECADList.html

Terry Pinnell
Hobbyist, West Sussex, UK

 

[Chaos Master]

Hi folks,

I would like to know wich schematics editor and/or simulator you use wich
is free. I looked forward to find a GOOD one and all the acceptable things
I found were professional tools wich were time-limited licences. I could
find a pirate version of these but it's not my philosophy. So if some
people out there have suggestions, thanks in advance !

LTSpice [www.linear.com] + gEDA (if you're under Linux') or EAGLE (if you're
using Windows). LTSpice has a great non-official "newsgroup" at Yahoo! Groups,
with various tools, symbols, models, discussion, etc..