S
SpencerJ
- Jan 1, 1970
- 0
Hello
I am looking at the possibility of designing a digital barometer circuit that would allow an output of incremental pressure values that could illuminate a number of corresponding LEDs.
For example, at 1000hPa - LED 1 would illuminate
at 1005hPa - LED 2 would illuminate, and so forth.
I would also like to incorporate an LED that would illuminate if the pressure was to fall quickly for example - a storm warning indicator and a general rising/ falling LEDs
I appreciate that professional weather stations can provide this information, but it's often shown on bland and generic-looking LCD displays.
Would be most grateful if someone could suggest how I may go about approaching this project. My intention is to produce something that is informative, yet visually attractive, in terms of illumination.
Many thanks
SpencerJ
I am looking at the possibility of designing a digital barometer circuit that would allow an output of incremental pressure values that could illuminate a number of corresponding LEDs.
For example, at 1000hPa - LED 1 would illuminate
at 1005hPa - LED 2 would illuminate, and so forth.
I would also like to incorporate an LED that would illuminate if the pressure was to fall quickly for example - a storm warning indicator and a general rising/ falling LEDs
I appreciate that professional weather stations can provide this information, but it's often shown on bland and generic-looking LCD displays.
Would be most grateful if someone could suggest how I may go about approaching this project. My intention is to produce something that is informative, yet visually attractive, in terms of illumination.
Many thanks
SpencerJ
