Led cluster module to fibre optic interface?

[special_k1]

Hi all. This is my first post here!

I've been hunting around the net for a suitable interface for a theoretical design. I plan to design and build a basic fibre optic illuminator unit such as these: http://www.fiberopticproducts.com/Lightunits.htm

I like the clinch nut interface idea as it will easily grip any number of unsheathed cable that I require, however I'm not so sure how I would interface with a led cluster module (pcb mount). I have seen heat shrink used to interface fibre with discrete led's but not sure if this would work for a cluster.

thanks in advance.

 

[special_k1]

What I have called the clinch nut is more properly known as a cable gland.

 

[Hero999]

Yes, a cable gland will work.

Most electrical suppliers sell them.

YOu could use a small plastic enclosure for the PCB and put the fibre optics in the gland opposite the PCB.