Nordmende TV.

[John Ely]

Hi,
I have a Nordmende Model TC 2910AST 68cm. flat screen, Made in China,
TV, the chassis model is TC 2910AST and it has a Thompson tube , its
problem is that there is no colour on AV , TV is OK. I replaced the HCF 4053
multiplexer which is on the AV inputs ,no change, I don't have a remote
control for the set or circuit diagram , I was wondering if anyone knows who
sells these or if anyone has any suggestions re. this problem, I have a
feeling that maybe it is just a menu setup item, although I don't know why
it would be, the AV gives a good B.W picture with normal sound.
Thanks John Ely.

 

[Phil Allison]

"John Ely"

Hi,
I have a Nordmende Model TC 2910AST 68cm. flat screen, Made in China,
TV, the chassis model is TC 2910AST and it has a Thompson tube , its
problem is that there is no colour on AV , TV is OK. I replaced the HCF
4053
multiplexer which is on the AV inputs ,no change, I don't have a remote
control for the set or circuit diagram , I was wondering if anyone knows
who
sells these or if anyone has any suggestions re. this problem, I have a
feeling that maybe it is just a menu setup item, although I don't know why
it would be, the AV gives a good B.W picture with normal sound.

** You ** MUST ** get the remote control.

Then make sure the AV input has not been set to NTSC or SECAM in the menu.




......... Phil

 

[John Ely]

"John Ely"



** You ** MUST ** get the remote control.

Then make sure the AV input has not been set to NTSC or SECAM in the menu.




........ Phil


Thanks for the reply Phil, I agree I need the remote, however I have been

unable to find out who sells this set. I bought it at an auction without
the remote.
John.

 

[Mr.T]

been
unable to find out who sells this set. I bought it at an auction without
the remote.

Have you tried a cheap universal remote?

MrT.

 

[Franc Zabkar]

Hi,
I have a Nordmende Model TC 2910AST 68cm. flat screen, Made in China,
TV, the chassis model is TC 2910AST and it has a Thompson tube , its
problem is that there is no colour on AV , TV is OK. I replaced the HCF 4053
multiplexer which is on the AV inputs ,no change, I don't have a remote
control for the set or circuit diagram , I was wondering if anyone knows who
sells these or if anyone has any suggestions re. this problem, I have a
feeling that maybe it is just a menu setup item, although I don't know why
it would be, the AV gives a good B.W picture with normal sound.
Thanks John Ely.

Which jungle chip does it use? My old Sanyo can be forced to either
NTSC or PAL mode by manually controlling the PAL/NTSC pin of its
jungle IC. You may be lucky ...

If you play an NTSC DVD through the AV inputs, do you see colour?

- Franc Zabkar