Part Wanted: RCA Model 46GW700C; HV BLOCK 191834, 173494, 2460183, 2460187

[Mr. Meval]

RCA Model 46GW700C
Made 1988
Part HV BLOCK (HV Splitter)

I need a part 2460183 which is in an HV BLOCK in an RCA PTV. This number
is printed on the part. It is probably a Hitachi number. I've been told
that this was superceeded by 2460187. The other numbers 191834 and 173494
may be compatible.

This is a HV BLOCK and had four threaded HV lead holders one from the
flyback and three to the picture tubes. There are THREE wires going to a
connector (marked with an O) that plugs into the main board. One appears
to be a ground lead, one is a signal line (xray?) and the third is a
shield for the signal line.

I thought that http://www.technotronic-dimensions.com/products3.html had
the right one and was not paying attention to the picture. He is offering
the incorrect one as it has a twist lock connector for the flyback and
three threaded connectors for the CRTs, there are two black wires but no
signal line and no connector.

I appreciate your time.

 

[Mr. Meval]

I cannot use an inaccurate substitute which is what appears to be commonly
available.

I am still searching for this part.

Thanks

 

[techforce]

You will likely continue to search without success.

|
| I cannot use an inaccurate substitute which is what appears to be commonly
| available.
|
| I am still searching for this part.
|
| Thanks
|
| On Tue, 03 Feb 2004 14:08:42 +0000, Mr. Meval wrote:
|
| > RCA Model 46GW700C
| > Made 1988
| > Part HV BLOCK (HV Splitter)
| >
| > I need a part 2460183 which is in an HV BLOCK in an RCA PTV. This number
| > is printed on the part. It is probably a Hitachi number. I've been told
| > that this was superceeded by 2460187. The other numbers 191834 and
173494
| > may be compatible.
|

 

[Art]

Due to the set's age it is probable the part is no longer being produced by
the manufacturer or supplier.

 

[David]

He is not going to find one. Due to the age that is a high failure
part. Long since discontinued, more than 5 years. IT is highly
unlikely there will be any of those sets used available with a good HV
part to pull.

David