Latest activity
-
Ccount duke replied to the thread Hello, Welcome! (Introduce yourself).hi im mark i build off road powerchairs for my wife and myself and some friends i use mostly dynamic dx/dx2 control systems as although...
-
WHONOES replied to the thread E-mu 1820M - outputs low and distorted after some work on it.Have you created a solder zit between two pads by any chance? -
WHONOES replied to the thread JBL Bar 2.1 Mk2 making screeching sound when audio is played..Some Switch Mode Power Supplies tend to go into "Intermittent mode" when lightly loaded. This tends to make the transformer squeak. A...
-
Llogandrift replied to the thread Impedances....When a normal speaker is used as a microphone, it typically produces a relatively low-impedance output (since most speakers are in the...
-
like-acht posted the thread Design considerations for high-current outdoor power distribution units in Power Electronics.We are designing a compact PDU for an outdoor industrial application (operating in a Class II environment). One of the requirements is...
-
Ddanadak replied to the thread Impedances....LOW HIGH (typically, no point in altering speaker response or output with LOW) If earphone magnetic LOW HIGH If earphone...
-
-
Hi all. A normal, typical speaker being used as a microphone has a - low impedance output or a - high impedance output and requires a... -
Ddanadak replied to the thread JK Flip-Flop Toggles Twice from One Button Press.Code eliminate need for J-K possibly, without schematic we need more complete description. Is OP toggling J-K with button or sampling...
-
-
KKrishna Sankhyan replied to the thread Buck converter calculation does not match with LTspice results.Probably due to non-ideal parts đź‘Ť Check ESR, inductor DCR, diode/MOSFET drops, and CCM vs DCM.
-
Ddanadak replied to the thread Max Current and Shorted Current.Of course there are the parts that use foldback current limiting to manage that. As well as thermal limiting monitoring die temp as well.
-
KKrishna Sankhyan replied to the thread Max Current and Shorted Current.Max current is what the device can safely supply under normal conditions, while short-circuit current is the much higher current that...
-
Ddanadak replied to the thread JK Flip-Flop Toggles Twice from One Button Press.RC approaches, without using a Schmidt trigger gate or comparator with hysteresis can generate problems due to excessive rise and fall...
-
-
CCrafts4Me replied to the thread revolving chandelier with a way to plug in led strips.i am sorry i am coming back to this i have my crown, 2 feet x 2 feet lit with led lights rgb strips and individual mini lamps all 12v...
-
Delta Prime replied to the thread M-audio BX5 buzzing problem.Correction:600 to 1.2kHz.
