Latest activity
-
Delta Prime replied to the thread JK Flip-Flop Toggles Twice from One Button Press.Could you show us a schematic of your circuit, please? -
Eeva_402 posted the thread JK Flip-Flop Toggles Twice from One Button Press in Microcontrollers, Programming and IoT.Hi everyone, I’m using a JK flip-flop for a simple state control circuit. Pressing the push button should toggle once, but sometimes...
-
Delta Prime replied to the thread M-audio BX5 buzzing problem.Are any of these the one you’re working on? M-audio BX5 D2 M-audio BX5 D3 M-audio BX5 Carbon Black How old is your unit, high...
-
-
SDisclaimer: I’ve already fixed one of these speakers (it had a really loud buzz) by replacing the 2 bad 4700uf caps. Now my other one...
-
-
crutschow replied to the thread Max Current and Shorted Current.The shorted current will be slightly larger than the regulated voltage maximum current, due to the low gain of the current limit... -
Thank you -
Typically the BT chip datasheets have recommended antenna interface design layouts. If all they give you is S parameters ...
-
Thank you
-
I think that it’s possible to add an external antenna. Cut the PCB antenna traces to eliminate it and use either a SMA or U.FL...
-
Hello, Here is a youtube channel that can help with windows problems: https://m.youtube.com/channel/UCqUO6Q6WusCK6d4kV8HMK_A Bertus
-
No Rl does not have to be 0 to force Q2 to rob Ibase of Q1. It just has to be a value that hits the Ilmax you calculated. If it did go...
-
Probably the brand on the phenolic board before it was etched.
-
Hello, You could make your own schematic using the traces (wich make the connections between the components) and the components on the...
-
Delta Prime replied to the thread Troubleshooting Soundcraft CPS 450/b Power supply.I’ll have to take your word for that; now you have to measure the voltages at the pinouts, with the council connected; that is your load...
-
GGorillaToast posted the thread Troubleshooting Soundcraft CPS 450/b Power supply in Power Electronics.I got this PSU for a Soundcraft K2 console and it powers up, but of the 6 voltage indicator leds onthe front panel, only the +17v lights...
-
