Latest activity
-
Martaine2005 reacted to crutschow's post in the thread Cat door sensor jammed by steel (metal) enforced wall with
Like.
The plastic is just to provide more space between the sensor and the metal wall. It does nothing by itself otherwise to block the... -
crutschow replied to the thread Cat door sensor jammed by steel (metal) enforced wall.The plastic is just to provide more space between the sensor and the metal wall. It does nothing by itself otherwise to block the... -
davenn reacted to danadak's post in the thread Looking for a starting point for Micro-controllers... with Like.
Cypress, now Infineon owned, has an extensive line of AFM based SOC's. Example part has all these resources, ,most multiples of whats... -
SSandWiz replied to the thread Cat door sensor jammed by steel (metal) enforced wall.Hi again Martaine. I must say I don't fully understand what you are telling me. - What type of plastic strips are you suggesting...
-
SSandWiz reacted to Martaine2005's post in the thread Cat door sensor jammed by steel (metal) enforced wall with Like.
The second to last photo and the last photo show the overall aperture. 1/2” plastic strips inside the aperture forming a barrier. This...
-
Martaine2005 replied to the thread Cat door sensor jammed by steel (metal) enforced wall.The second to last photo and the last photo show the overall aperture. 1/2” plastic strips inside the aperture forming a barrier. This...
-
Hhankins replied to the thread Anyone identify this connector?.If you have seen the locking bar in place, you will have a good idea of its construction. Fabricating a locking bar from scratch is an...
-
Jjonas123 replied to the thread JK Flip-Flop Toggles Twice from One Button Press.What you describe sounds more like incomplete debouncing than JK clock sensitivity. A JK FF will happily react to every threshold...
-
Delta Prime reacted to crutschow's post in the thread Television reception antennas farce... with Like.
And what will you do if you have that info? I would think the antenna gain vs. frequency (into a fixed load) would be of more interest. -
narkeleptk replied to the thread ECU repair.What are your issues with car and what is it that you suspect the ecu is doing/not doing? -
KKennyIII65 replied to the thread Looking for a starting point for Micro-controllers....Thank You! That's a great start!
-
KKennyIII65 reacted to danadak's post in the thread Looking for a starting point for Micro-controllers... with Like.
Cypress, now Infineon owned, has an extensive line of AFM based SOC's. Example part has all these resources, ,most multiples of whats...
-
Ddanadak replied to the thread Looking for a starting point for Micro-controllers....Cypress, now Infineon owned, has an extensive line of AFM based SOC's. Example part has all these resources, ,most multiples of whats...
-
-
Ddanadak replied to the thread ECU repair.Also if you can get access to a good optical inspection scope look at soldering, amazing how much stuff made with marginal solder...
-
KKennyIII65 reacted to Harald Kapp's post in the thread Looking for a starting point for Micro-controllers... with Like.
For wireless the ESP series og controlles is very well suited. For easy startes it can be programmed using the beginner friendly...
