Latest activity
-
Aalfredthegrape replied to the thread Suitable replacement for a large Siemens capacitor in an old IBM XT power supply.I notice that the tolerance for the KON22145 component is +/-20%, whereas the original capacitor is +50/-10% Is this something I should...
-
Aalfredthegrape replied to the thread Suitable replacement for a large Siemens capacitor in an old IBM XT power supply.@davenn: Please see attached photo of the underside of the board the capacitor is soldered to. @bertus: I'd be grateful if you would...
-
-
Ccollectors replied to the thread RF-ID advice needed.Thanks for the info. I am open to any adaptations. I'm even looking at house/factory alarm systems that use ID chips in each detector...
-
CTo show info on a TV screen the probably most popular option is by using an HDMI interface. Small microcontrollers7 microcontroller...
-
Ccollectors replied to the thread RF-ID advice needed.Hi, thanks for the reply. To main idea for this was to have the trains show up on a large TV/monitor using Google sheets, & what seemed...
-
The key parameter that you need is the position of the train: "...when a train enters & leaves an area", An RF-ID will NOT accomplish... -
Hmmm. Yet another drive-by poster who is only looking for a "quick answer" and is unwilling to enter into a discussion. If I were... -
hevans1944 replied to the thread power.PCB design often (always, actually) occurs post circuit design, mainly because it is difficult if not impossible to layout component... -
hevans1944 replied to the thread Newbie Advice Needed Please.Hmmm. Yet another drive-by poster who is only looking for a "quick answer" and is unwilling to enter into a discussion. If I were...
-
hevans1944 replied to the thread RF-ID advice needed.The key parameter that you need is the position of the train: "...when a train enters & leaves an area", An RF-ID will NOT accomplish...
-
hevans1944 replied to the thread issue with homemade DC motor + hall effect sensor.The A3144 has an open-collector NPN transistor output. This needs to be directly collected to the MOSFET gate input and pulled up with a...
-
crutschow replied to the thread How is coating wear on ESD tweezers typically assessed in production environments?.What is the purpose of this "anti-static" coating on the tweezers since they are made of conductive metal? Does the lack of it affect... -
Martaine2005 reacted to bertus's post in the thread Suitable replacement for a large Siemens capacitor in an old IBM XT power supply with
Like.
Hello, The datasheet i posted shows wich pin is positive and wich pins are negative. Even an axial capacitor would be possible to use... -
davenn replied to the thread Suitable replacement for a large Siemens capacitor in an old IBM XT power supply.well, if we cant seen the pins (even whilst it's still on the board) - then it's very difficult to help you
-
Aalfredthegrape replied to the thread Suitable replacement for a large Siemens capacitor in an old IBM XT power supply.@bertus: Unfortunately the cap you mention is an axial component, and I require a radial one. It looks as though I'm going to have to...
