Latest activity
-
RAssalamu Alaikum and hello everyone. An electrical engineer and tech blogger here. About 3 weeks ago, I made this circuit to read books...
-
-
Ddanadak replied to the thread Asking about c005 time chip.For future reference a more capable timer solution : https://www.electro-tech-online.com/articles/pulse-sequence-generator-smart-timer.938/
-
Aalfredthegrape replied to the thread Suitable replacement for a large Siemens capacitor in an old IBM XT power supply.Thanks to everyone who contributed to this thread. Armed with this information I replaced the Siemens capacitor with a Rubycon...
-
PI have two C005 timer chips. Each chip works as a one-shot timer. Trigger: active LOW. During timing, OUTPUT = HIGH. When timing ends...
-
Tthaohuyenvovan replied to the thread PCB Manufacturing — Complete Beginner’s Guide.For thickness, 1.6 mm is usually the safe default. I’d only go thinner, like 0.8 or 1.0 mm, if the board needs to fit in a tight space...
-
Sskylerbaggins replied to the thread How is coating wear on ESD tweezers typically assessed in production environments?.Minor coating wear is usually a maintenance issue, not an immediate failure. Most facilities replace ESD tweezers only if they fail...
-
EricHasslinger replied to the thread The Simple DiseqC1.2 Satellite Dish Positioner for beginners..Firmware V1.40 Please report about DIY. -
-
cuz it isnt a fibre, it's a coax cable ... that link Martaine did is good He beat me to answering your Q, I was going to give the same... -
HHelloElab replied to the thread RF booster or repeater.Thanks guys. I thought there may be simple way I don't know about. Buying several repeaters, each drawing power 24/7 would create data...
-
davenn reacted to Harald Kapp's post in the thread How is coating wear on ESD tweezers typically assessed in production environments? with
Like.
Imho both of you are partly right: When you look up ESD coating you'll find that it is conductive, but at a comparatively high... -
Thank you sir. Much appreciated
-
C4 is a 25V 470uF capacitor. Hope that helps.
-
davenn replied to the thread RF booster or repeater.cuz it isnt a fibre, it's a coax cable ... that link Martaine did is good He beat me to answering your Q, I was going to give the same...
-
Example on the theory. Your query seems to have changed somewhat. Now you’re asking about transmitting RF. And not causing...
