 |
 |
CB
transmitter
source:
Kyriakos Kontakos
TECHNICAL CHARACTERISTICS:
Tendency of catering: + 12V/1A DC
Frequency of emission at AM: ~27MHz
Force of expense:
2,5W

Materially:
The resistances are 1/4W.
|
R1 |
10KW |
|
R2 |
100KW |
|
R3 |
39W |
|
R4 |
180W |
|
R5 |
4,7KW |
|
R6 |
1MW |
|
R7 |
3,9KW |
|
C1, C9, C10 |
100nF polyester |
|
C2 |
33pF
ceramic |
|
C3 |
470pF
ceramic |
|
C4 |
4,7nF
polyester |
|
C5 |
1nF ceramic |
|
C6 |
10-60pF trimmer |
|
C7 |
220nF polyester |
|
C8 |
10mF/25V
electrolytic |
|
C11 |
47mF/25V
electrolytic |
|
C12 |
1,5nF ceramic |
|
J1, J2, J3 |
VK200 (inductor
of high frequencies). |
|
L1, L2 |
Wires of coper
(smaltwme'na) with diameter 0,4mm wrapped in plastic support
of diameter 6-7mm of perjstrofjkoy' core. For the L1 you
wrap 13 coils. For the L2 you wrap 4 coils. (As in the
receptor CB.) |
|
L3 |
Wrap 20 coils
cupreous wire of (0,3-0,4mm diameter) convolution round a
resistance 2,2W/2W of coal. |
|
Q1, Q2 |
BC108 |
|
Q3 |
BD139 |
|
Q4 |
2N4427 (it is
not replaced) |
|
Q5 |
BD329 (or
2N3553) |
|
Y1, Y2? |
Crystal hails. (You can you put
the so much, those who also channels that you want you
emit). See here. |
|
MIC |
microphone with preamplifier. |
|
ANT1 |
Aerial for CB
(For the trials is enough a piece wire of few metres but
better connects a regular aerial so that does not have many
stagnantly and burns the transmitter). |
|
S1 |
(Choice of
receptor of - transmitter, if you combine the transmitter
with the receptor CB, you are supplied the receptor from
exit 12V OUT) |
|
S2 |
Switch of choice of channel. It
has so much places, those who also the channels that you
want pja'nete.(Kaly'tera he is mechanically connected with
the S1 of receptor for simultaneous change of channels). |
Charge 50W:

Materially:
|
R1, R2 |
100W/2W |
|
C1 |
47nF ceramic |
|
C2 |
4,7nF ceramic |
|
J1 |
VK200 (inductor
of high frequencies). |
|
D1 |
Passage of
germanium (AA119 or OA92 or..). |
Regulations:
For
the regulation it needs a voltmeter (with needle better) and
charge 50W/5W.
-
Connect charge 50W in the place
of aerial, with the voltmeter in the exit voltmeter.
-
Be supplied the transmitter
with + 12V. It will be supposed we have consumption between
0,7-1A.
-
With a screwdriver we regulate
the core of inductor L1/L2 and later the variable C6 until we
see the biggest tendency
-
We connect the microphone and
speaking we observe the clue in the multimeter. If all have
become right will be supposed the tendency, speaking, to go up
roughly 30-35%.
 |
|