Church bell Controller

photo_7

 

Description

This circuit is a church bell controller. Basic component is an ATmega32 microcontroller. At the circuit 1 24LC32 eeprom memories is being used.

As control I created a menu who will be appeared on 4×20 LCD (Liquid Crystal Display). The menu browsing can be done by 6 buttons at the face of the circuit’s box (Menu, Up, Down, Enter, Start, Stop). The all firmware binds about 30Kbytes flash memory and can be increased by adding new features-functions. This program has been written in C with CVAVR compiler.

The idea of this circuit is being given by a friend of mine who has an foundry and he is building bells. I have made the PCB by my self.

Features

  • More 75 different melodies (ADAM, PANYGJRJKO, AGJORJKO, etc)
  • Control of electrometrical clock of church with the production of pulse of duration 1Sec each one minute.
  • Automatic correction in case of power loss.
  • Percussion of clock each half but also entire hours, with possibility of choice of hours of silence (for tourist regions and hours of common quietness).
  • Manual correction of electromechanical clock.
  • All regulations become with the help of guidance (menu, up, down, enter, start, stop)
  • When it runs a rhythm we have the possibility of increase or decrease her speed, the information will stored in memory 24LC32.
  • Display time (DS1307), with backup battery.
  • All the in formations are displayed on 4X20 LCD.
  • Control up to 5 bells and 1 clock.
  • The user create his own program

Schematic

Bell_controller_sch

Photos

Breadboard

 

photo_1

photo_2

photo_3

photo_5

photo_6

Please follow and like us:
Pin Share
Subscribe
Notify of
guest

9 Comments
Inline Feedbacks
View all comments
solomon

how can make a simple door alarm that is controlled by computers

Alexis Fernando

In this schematic diagram connection of C4 has not been shown. Kindly give the details through my mail id japninfdo@gmail.com also send me the program also if you have. Thank you.

emmanuel

can i get the hex file … send it to my mai
l emmanuelwizardd@gmail.com

staro

can i get the hex file … send it to my mai
rsstruga@hotmail.com

maria mavrantza

where are you from:

ilias mavrantzas

how much does it cost

Vincenzo Francesco

Beautiful project can you send the program to my mail please: vincenzofrancesco200216@gmail.com

RELATED PROJECTS

TOP PCB Companies