-
Posts
4 -
Joined
-
Last visited
Never
Content Type
Profiles
Forums
Events
Posts posted by gaark
-
-
sir,
I need 0 to 30 V VAriable power supply design using UA 741 as the current limit and another 741 as a voltage limiter.
I already have one circuit. In that the 723 provides the supply for these two 741s only. and the 10 th pin in the 723 drives the a transistor which control the output voltage. Here i used three 3055 transistors to drive the load. But in 5V-1.5A loading the transistor was very musc dissipate the heat enenthough with a heavy heat sink. Here one doubt is each transiustor is rated to 120 Watts.
Convert 0-30V 3A PSU to 5A or more
in Electronic Projects Design/Ideas
Posted
Hi,
[move]I am Gaark. [/move] [glow=red,2,300]Thank you [/glow] for your response about the variable psu.I read your discussion on the PSU only in the transistor/heating phenomena.If yo need to arrest more heating, one of the easiest way ( other than using any mechanical ) to simply control the AC input voltage to the transformer using a Traic by closed loop.If you adopt this the collector voltage cant reach more and the transistor is safe at any loading condition ( With in the limit of the source you have )
But i need formal calculation for a particular voltage / current output form the PSU.Before switching ON the PSU i need the predetermined setting. Please suggest me.Hope I get all sugestion from your side. Because i am a biginer in electronics.
[glow=red,2,300]Waiting for your enthusiastic replays.[/glow]