-
Posts
4 -
Joined
-
Last visited
Never
Content Type
Profiles
Forums
Events
Posts posted by Deni
-
-
I only had problems finding the diode, I used a 10mH as L1 becase I want to make the whole thing on a small board. When I remove D1 the led stops liting and thats kinda obvious. But [glow=red,2,300] CAN [/glow] I use that diode instead?
-
I've built the cell phone indicator, but i have some probs :-[ First I used a BAT86 instead of the BAT46 which i suggested, they didn't had anything else alike in the store is that a usable diode fo rthis circuit? When I turned the power on I did 5V the diode lit constantly, it seemes that the current just passes through D1 and the led from + to -. When I turned the power down to 1.5V the diode didn't lit anymore but it didnt flashed either near a ringing phone. What could I have done wrong? :'(
Newbie Here
in Projects Q/A
Posted
Try aaroncake.net a great collection of circuits and a great forum where you always can get help! Then you can try to find some circuits at:
javed007.co.uk/electronic-project-circuit/easy%20project1.html
Good luck!!! :) ;D