Jump to content
Electronics-Lab.com Community

dark_rebel

Members
 View Profile  See their activity

  • Posts

    5

  • Joined

  • Last visited

    Never

 Content Type 

Posts posted by dark_rebel

  3. Video Assist

    in Electronic Projects Design/Ideas

    Posted

    ok... i got the model number.

    its an ADT A-C4CM/4

    on the bottom it says 15V DC 3.0W Max(NTSC)

    im guessing that since it says NTSC it should be outputing analog video but i cant get it to work...  i know that pin 5 and 6 are power... but ive tried putting the video on the remaining 4 pins and i get no video.

    im seriously hoping that someone here can help.... i would really hate to have to tell the guy that i cant help him. 

    Thx

  4. Video Assist

    in Electronic Projects Design/Ideas

    Posted

    Hey, Im working on a project to adapt a surveillance system.  Currently there are 8 cameras going into two monitors.  It is an ADT system and the cameras connect to the monitors using rj14 6 pin connectors (ive found that pin 5 is + 9-15 V and pin 6 is ground).  The guy wants to keep his existing 8 cameras but switch the 2 monitors for a security DVR which uses BNC video inputs and RCA audio inputs.

    Ive built a 12V 2 A PS and the power bus for all 8 cameras.  But now the tricky part is getting an analog video stream out of the cameras.  I thought that they were outputting analog video but i cant get any video onto a regular TV. 

    If ANYONE can provide any useful info i would be VERY greatful.  anything from ADT pinout, or what i can do to get an analog video sinal from the camera.  Thank you in advanced.


    PS. . . im at work but i will post the camera model when i get home.  That might be useful.

×
×
  • Create New...