Jump to content
Electronics-Lab.com Community

bullets

Members
  • Posts

    4
  • Joined

  • Last visited

    Never

Posts posted by bullets

  1. hmm... schematics, im not sure. id probably have to buy one of those Hanes manuals or something similar. i think they have schematics in there.

    The way my driver side door rolls down is almost like a two position switch. i can hold it down and it is rolling down as i hold it. then if i go to the "second" position, past a certain point with that little window switch it starts to go down automatically. so if i would be able to figure our what kind of a switch that is, get one, run all the windows to that one switch. If i hold it, all windows will roll down an equal amount, and when i go past that certain pointm, it will be automatic. Is that at all possible? is that what you guys are talking about?

    i will be ripping into my door pannels to install sound insullation in a couple weeks, i will see how the wires are ran. Maybe i will be able to get the Hanes manual. the car is a 2002 honda civic EX sedan i anyone has ideas on how to find a schematic


  2. If the car already has power windows, you can use the wire that is already ran to the driver door. Personally, I would just install another switch, with all the windows in parallel. Then, if you want, you could add a timer so when the button is pressed the windows will roll down on their own.

    However you do it, the wires to all the windows should already be in the driver side door.


    Yes all i would have to do is tap into the wire that goes to the driver side door. if i was going to wire all of them in parallel, how exactly could I add a timer or some sort of other thing so they all roll down with just one press of a button and not holding of the switch untill they are down.


    If all the windows latch to down position on a short impulse it should be easy. Just wire them all together from one switch using a diode in series for each window and the standard wiring won
×
  • Create New...