-
Posts
19 -
Joined
-
Last visited
Never
Content Type
Profiles
Forums
Events
Posts posted by cdonke
-
-
Can I somehow plug just some pins to conect a Diskman in the CD Changer slot, this way the radio will "read" the Diskman to the speakers???
-
Does anyone have the wiring diagram for the 13-pin cable of the KDC-C800 Kenwood CD Changer ???
Tks,
Christiano. -
I found these options:
http://www.hut.fi/Misc/Electronics/circuits/strobo_12v.html 12V stroboscope
http://www.aaroncake.net/circuits/inverter.htm 12VDC to 120VAC inverter -
http://www.electronics-lab.com/projects/motor_light/005/
This project is designed for 120V, but I intend to use it in my car.
What happens if I use the 12V battery?
Is it a good idea to make the 12V become 120V???
If it is, how can I make it?
Tks in advance,
Christiano. -
That's why I love smart people... eheheh...
I'll biuld a FM transmitter...
Is there anyone that you recommend??
I've found this one...:
http://www.electronics-lab.com/projects/rf/023/index.html
Is it good???
Tks in advance,
Christiano. -
I don't have another amplifier for the speakers.... Only the stereo...
I was going to plug the output of the device directly on the wires that go to the speakers. -
Did someone build this??
Does it work well???
How loud can 22 Watt get??? Enough to increase a discman output into an auto's speakers (Two 200W, 4 Ohms Pioneer, on the back)?
If not, which device should I build???
http://www.electronics-lab.com/projects/audio/006/index.html -
I'm trying to build the damn TV Signal Amplifier but it came without some important information... Like the lenght of the Inductor or its inductance...
I am assuming that its lenght is 0.72 cm. ( Number I came through an insane proportion of sizes from an image of the circuit that I'm trying)
This way, using Quantum's equation: (8^2 * 0.05^2) / 0.0072, resulting ~22
I will assume too, that the distance among turns is 0. -
I just can't find an specific inductor...
It only says that it must have:
Diam: 5 mm
Wire: 0,5 mm
Turns: 8
What should be it's inductance??? How can I calculate it???
Can I replace it somehow?? With some resistor, another inductor, ow something??
Does the distance between turns affects the component???
Tks,
Christiano. -
Just for the record...
The HOT is the inner copper cable
and the SHIELD is the outer silver twisted wires,
right??? -
http://www.electronics-lab.com/projects/rf/003/
TV Signal comes by a coaxial cable, this way, there are 2 wires...The signal from the antenna is applied to the input of the circuit and through C5 is fed to the base of the transistor.
I can see where the C5 is, but where is the d**n input??
Is it the nr. 4 and 5???
And what about the output???? Is it the nr. 1, 2, 3 or 6???
This schematic is well drawn, but without some important information...
Tks in advance,
Christiano. -
As we can read in the image above, there is only on Trasistor (TR), but, at the schematic page smrtkit lists 3 transistors (BFR90, BFR91, BFW92).
I'm a newbie in electronics, and although I notice they are diferent, I can't understand what is this diference...
Datasheets:
BFR90
BFR91
BFw92
Led display Digital Voltmeter question
in Projects Q/A
Posted
if the input is 5.6v will it read 5.6 or only 5????