-
Posts
14 -
Joined
-
Last visited
Never
Content Type
Profiles
Forums
Events
Posts posted by marvellous
-
-
My project mesures 134ma from the battery
I have just canged my L2 to 1M 2w and 15turns of 0.2mm(insulated)
also changed R3 to 47e 2W
changed Q1(T1) to 2n2219
changed Battery to powersupply(lm317 based 2A transformer)set @ 15V
now Q2(or T2) is getting verry hot
Q1(or T1) is just warm
Signal is stronger and better quality!It will be very difficult for you to tune C7 and C8 for maximum output without a signal strength meter, a helper and walkie-talkies. It should transmit a couple of kilometers. Can your helper scream that far?
would Field Strength Meter
http://braincambre500.freeservers.com/field%20strength%20meter.htm
work for tuning?
(We can Use Cellphone for communication)
would the antenna
http://braincambre500.freeservers.com/open%20end%20half%20wave%20dipole%20antenna.htm
work for this project?
Thanks the help I'm getting is appreciated! :) ;) :D8) ;D
(only to think I nearly gave up on this project!) -
Thanks for the reply
I got my circuit working (C4 was broken)
I Can transmitt to radio
but none of the transistors get hot ???
(ran it without heatsinks on both transistors)
also the range is short about 5meters
I used a 4.5Ah 12v battery for powersupply!
I used a 2n2222a for t1
I used a 30Cm 1.5mm wire for antenna (soldered onto the Pcb)
Will try your suggestions today for it and keep you posted on it!
can I use 0.2mm insulated wound around a 1Meg resistor
Thanks in advance! -
I used a Cd Walkman
also for t1 I used a 2n2222a
for the windings I used insulated wire o.7mm dia
thanks! 8) -
The circuit is not working ???
http://www.electronics-lab.com/projects/rf/021/index.html
(thats the one ive built)
I've tried all tips I got but no transmission!
Maybe I shoult try another Ciruit!
Thanks for the help anyway 8) -
Thanks!4 the help ;) :D :-*
will keep you posted! -
Thanks Thats a Lot Of Help
Someone else Please! ;D -
Im a newB & im Busy Building the http://www.electronics-lab.com/projects/rf/021/index.html and
have a couple of questions? ???
How do I make the Inductors do I use
Enarmelled (insulated)Wire or Do I Just use Bare Wire?
Should My windings be spaced apart or should ther be close together?
Is it possible to substitute 2n2222a for T1
Thanks in advance! :) ;) 8) -
i am building http://www.electronics-lab.com/projects/rf/001/index.html
and i would like to know do I build the RFC1, RCF2, RCF3
or do you buy it off the shelf? (cant find it here in South Africa)
can I just buy the bead and make it?(what kind of wire would I need)
I'm a Newb in RF electronics!
Thanks in advance!
Another 4watt Transmitter Question
in Projects Q/A
Posted
Thaks again!
Do you know of a DIY Field Strength Meter
& DIY Antenna you could recomend? ???
What do you think of this one?
http://www.geocities.com/tomzi.geo/antenna/antenna.htm
I made my own Heatsink that clips on (with heatsink grease) ;D
Thanks in advance!