-
Posts
4 -
Joined
-
Last visited
Never
Content Type
Profiles
Forums
Events
Posts posted by giova
-
-
Hi Audioguru,
I really appreciate the help you try to give me.
Well I checked the pots and they give 5.4k when they are at the middle.
My transformer is 24v 5A.So I think that i can have 3A and more regulation.
When i regulate voltages works perfect from 0 to 30V.
However when i regulate the current It doesn't go more than 0.08A no matters where i put the pot of the volatges.One more thing is that when i put the current pot to one end then the voltages drop to
-0.06, the led lights then, and the current is zero.When i turn a little the current just to show me 0.01A or 0.02A then the led turn off and the voltages work normal.
One more thing that i tried is that i changed the current 10k linear pot with a 100k pot not linear and i managed to regulate the current from 0 to almost 1A.But this is also no right.The led turns on ONLY when i regulate the current to zero and the voltages drop
to -0.06 only then.
I don't have much experience at electronics and i really can't figure out why this happens.I have checked my project with the original schematic thousand of times and i can't find any mistake.I also bought some new tlo81 and changed them but the same problem persist! -
Hello audioguru and thank you for your quick answer!
First yes I use the original project's schematic.
I also checked the things you said and they seem to be ok.
The problem is tha i can;t go more than 0,08 amperes and when i regulate amperes to minimum the voltages drop to zero is this correct?
I would also like to ask if theproblem may be to pot.The pots I have they write: 1 -
Hi to all!
I built this project but something goes wrong.
I can regulate the voltage from 0 - 30 BUT I can't
regulate the current.Also when I turn the current's pot all the way
then the volts drop to -00.6 !!
Can someone help me?
I use a 24v - 5A Transformer.
I also use the TL081 IC.
And finally i use the tip131 transisors for q1 q2.
0-30 Vdc Stabilized Power Supply
in Projects Q/A
Posted
Hi Audioguru,
I checked the C8 and all the connection around U3 and i also changed the C8 but the same problem exists.D7 is always about 5.6V.Anything else to try?