Roby_m
-
Posts
8 -
Joined
-
Last visited
Never
Content Type
Profiles
Forums
Events
Posts posted by Roby_m
-
-
Hi,
I found one very easy. I don't expect to be authentic, but many guys made it and they are glad by its sound.
Now, I do not know what to do, should I follow the PCB on the site with it's components or should I follow the original schematics?
PS. I made the PCB, and that's why I am in a dilemma.
Please help.
Thanks! -
Hi ,
I found this amp and a decided to make one.
http://www.electronics-lab.com/projects/audio/014/index.html
But I was wondering...I saw there are used some diffent values caps. On the PCB and the schematics on this site there are 4 10uF caps, and 4 100uF caps, but there aren't used this values ( saw in the photo of finished amp).
If you are kind to help me with some more info about these.... -
Thank you! I'll try it.
-
Hi,
So you don't advice me to procede with this project?
I liked it because it is rather simple and small (I am low on money and space in my ampl case).
I have made a amplifier after the schematic in the picture attached and I need a filter for it...
What is your advice? Should I make the filter or should I look for a better one? I am o bass lover :)
Thanks a lot! -
Hi,
Yes I was reffering to that site, but I was telling you about the PCB caps values, which are different from the schematics. ::)
Thanks! -
Hi
I didn't make the filter yet. But i have some questions ::)
-caps 4.7/35V in the schematic don't appear, why? i don't understand ;
and they are two
-might they replace the 0.4uF cap?
-what does the led ?
Please help me!
Thanks!
STK465 Stereo Amp
in Projects Q/A
Posted
Hi again... after some time :)
I didn't finish the amp then; now i decided to get it done.
When I was looking for GND ( 0V )..it hit me; should I connect the signal - and the output - with the 0V ? I'am afraid for oscilations... But in the PCB they are common...very odd. Don't know what to do.
I'm a begginer, so I need your help, please.
Thanks :)