for whoever reads this can be useful,took me a while to figure out
The EGS002 Will ONLY produce waves for more than 3 seconds IF...
1»»»»» pin 1 (over current) must see LESS than 0.5 volts DC (2 blinks of the egs002 led if not...);
15»»»»» pin 15 (output voltage feedback signal) MUST see between 2.75 to 3.15 Volts DC; set the little blue pot. to 3.0 Volts to test(3 blinks if over 3.15 OR 4 blinks if under 2.75 V)
16»»»» pin 16 (over temp) must see LESS than 4.3 volts (5 blinks if over 4.3 vdc)
These are the ICs FACTORY values ,and I confirmed them myself on my own inverter builds
Not ONE youtube channel teaches these things,is it on purpose? i should start my own...
login
12v 3000w inverter repair help
in Power Electronics
Posted
for whoever reads this can be useful,took me a while to figure out
The EGS002 Will ONLY produce waves for more than 3 seconds IF...
1»»»»» pin 1 (over current) must see LESS than 0.5 volts DC (2 blinks of the egs002 led if not...);
15»»»»» pin 15 (output voltage feedback signal) MUST see between 2.75 to 3.15 Volts DC; set the little blue pot. to 3.0 Volts to test(3 blinks if over 3.15 OR 4 blinks if under 2.75 V)
16»»»» pin 16 (over temp) must see LESS than 4.3 volts (5 blinks if over 4.3 vdc)
These are the ICs FACTORY values ,and I confirmed them myself on my own inverter builds
Not ONE youtube channel teaches these things,is it on purpose? i should start my own...