leverperfect
-
Posts
4 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Posts posted by leverperfect
-
-
On 1/26/2022 at 10:57 AM, M Salman Sarwar Khan said:
The unit of power is not amps. you should use Watt. as far as I understand you question, you want a 100 watt supply with volts vary from 1 to 220 volts. The output power we can calculate by using formula P=VI so you can vary current and volt to get desire output power. To vary current and Voltage you can use transformer. cuphead
Are there any reputable transformer brands you can recommend to me?
-
On 1/3/2023 at 10:25 PM, tagjags said:
for whoever reads this can be useful,took me a while to figure out
The EGS002 Will ONLY produce waves for more than 3 seconds IF...
1»»»»» pin 1 (over current) must see LESS than 0.5 volts DC (2 blinks of the egs002 led if not...);
15»»»»» pin 15 (output voltage feedback signal) MUST see between 2.75 to 3.15 Volts DC; set the little blue pot. to 3.0 Volts to test(3 blinks if over 3.15 OR 4 blinks if under 2.75 V) basket random
16»»»» pin 16 (over temp) must see LESS than 4.3 volts (5 blinks if over 4.3 vdc)
These are the ICs FACTORY values ,and I confirmed them myself on my own inverter builds
Not ONE youtube channel teaches these things,is it on purpose? i should start my own...
Many thanks, It's useful for me.
TL494 half bridge smps
in Power Electronics
Posted
A great project. Has it had any new updates?