sssaaa Posted March 31, 2006 Report Share Posted March 31, 2006 hi to alli want a dipole antenna formula for FM band. Quote Link to comment Share on other sites More sharing options...
windoze killa Posted March 31, 2006 Report Share Posted March 31, 2006 What do you mean by formula? Do you want a half wave or quater wave dipole? Quote Link to comment Share on other sites More sharing options...
SM2GXN Posted March 31, 2006 Report Share Posted March 31, 2006 150/Freq(MHz)=Dipole length in metersI would say that quarter wave dipoles are very very rare. Quote Link to comment Share on other sites More sharing options...
windoze killa Posted March 31, 2006 Report Share Posted March 31, 2006 You are correct. They are very rare and also don't work all that well. But they are useful in confined spaces. Quote Link to comment Share on other sites More sharing options...
sssaaa Posted April 1, 2006 Author Report Share Posted April 1, 2006 I want half wave dipole formula for FM band 76-108 MHZ. Quote Link to comment Share on other sites More sharing options...
windoze killa Posted April 1, 2006 Report Share Posted April 1, 2006 I assume when you say formula you want to know what dimensions you need to use. If this is the case then you should consider the centre frquency that you want. To make things easy we will use 100Mhz which is close enough to the centre frequency. Now that we have 100Mhz as the frequency one full wave length at that frequency is 3 metres, so a half wave dipole will require 2 lengths of 1.5M. Most antennas for the FM band are made from 300ohm ribbon. You slice down the middle of one end 1.5M and spread them out horizontally. For it to work the best you need to make sure that it is perpendicular to the direction to the transmitting antenna.Hope this helps a bit. Quote Link to comment Share on other sites More sharing options...
sssaaa Posted April 2, 2006 Author Report Share Posted April 2, 2006 i want to make two antennas one for 82MHZ and other for 86MHZ Quote Link to comment Share on other sites More sharing options...
SM2GXN Posted April 2, 2006 Report Share Posted April 2, 2006 Hi sssaaa!Did you read our posts? windoze killa and I wrote about how to calculate the length.The formula is in there, just calculate the antenna at center 84Mhz it will do just fine for listening no need for two antennas, 150/84=Half wave dipole length in meters, cut the length in two pieces solder a 75 ohm coax or a twin lead to the two ends depending on the transmission hang the antenna horizontal or vertical.If you want two antennas just use the formula above and insert the frequency of interest. Quote Link to comment Share on other sites More sharing options...
sssaaa Posted April 2, 2006 Author Report Share Posted April 2, 2006 yes SM2GXN i read it but i found on search many formulas like468/frequency147/frequency142.5/frequency and you gave me 150/frequencywhich one is correct? Quote Link to comment Share on other sites More sharing options...
SM2GXN Posted April 3, 2006 Report Share Posted April 3, 2006 Hi sssaaa!As I said for listening it is not that critical, those formulas take conductor thickness as well as speed of the radio wave into acount. One can say that as the antenna element gets thicker the total length decreases and the antenna will cover a greater bandwith. If the antenna is to be used as transmitting antenna you will have to tune the antenna by cutting to proper length and resonance.468/Mhz= length in feet is a formula for guys living in US ;D Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.