AWG?

[Herman the German]

???
I saw a schematic concerning HV generators. There was an old flyback transformer in the circuit and how to change it. The windings of the primary coil were 22AWG and 18AWG.

Germans handle square millimeters and dia millimeter but no AWG at all.

How can I convert AWG to metric?

Greetings to all solder iron freaks.

Herman the German

[jgeidl]

If you go to this site:

http://www.powerstream.com/Wire_Size.htm

you will find a chart that shows AWG, Diameter in inches, and diameter in mm as well as some ohter characteristics.

Jim

[Herman the German]

OK. Thank You very much!

On the second try I got the whole list.

regards

HtG

[jgeidl]

You are very welcome.

Jim