kuxz2008 Posted December 29, 2009 Report Share Posted December 29, 2009 i was trying to build a motor that will be able to stop for about 5 sec when the one shot was trigger.the original circuit was that the output J5 is directly connected to the motor.i do a bit of addition and i try to connect the J5 to 2 AND gate and the 2 AND gate was connected to the output of the one shot IC. normally the output of the one shot is '1' and the motor will function normally.however when the one shot is trigger, a '0' will be sent to the 2 AND gate causing the motor to stop.will the circuit that i have attached work as what i have said?link for circuit diagram:http://54774c91.linkbucks.comhttp://630eb88e.linkbucks.com Quote Link to comment Share on other sites More sharing options...
Alex Tsekenis Posted December 29, 2009 Report Share Posted December 29, 2009 Please could you attach your circuit diagrams to the post instead of a hosting site? You can do this by clicking on 'additional options'. Quote Link to comment Share on other sites More sharing options...
david_harner Posted January 1, 2010 Report Share Posted January 1, 2010 I would like to build a digital strain gauge, that can plug in to my USB port.any ideas on how to do this ???Dave[email protected] Quote Link to comment Share on other sites More sharing options...
Alex Tsekenis Posted January 1, 2010 Report Share Posted January 1, 2010 Do you want to build it entirely on your own, or buy a few systems and put them together?What will the strain gauge be used for? Quote Link to comment Share on other sites More sharing options...
login
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.