NickyYTSRB Posted September 21, 2018 Report Share Posted September 21, 2018 Hello guys, im a 17yo student that loves electronics and i started working on custom tv-b-gone based on arduino version with rechargeable battery and i needed pcbs for it. Firstly i ordered pcbs(on the left) that were $3 PER PIECE and then i found out for JLCPCB. They have amazing offer of 10pcs 10x10cm pcbs for $2!! I could fit 6 tv-b-gone boards on one 10x10cm pcb and multiply that by 10 and you get 60 pcbs for $2!!! When i first ordered i tough that its just a low quality board but when i received them in 2 weeks (which is really fast) i was SURPRISED by QUALITY for that LOW PRICE. First there was no shorts between any of the tracks. My design has really tight traces and they came out perfectly! Silk screen is also really good and vias are covered fully which gives boards nicer look. Panel by JLCPCB really made my job easier and it is also good, VCut is perfect, you just can snap the boards with hands and sand the sharp edges. They also make solder paste stencils which are helpful with pcbs with 95% of smd components and its also cheap, only $7 for big stainless steel stencil! Ordering is really simple. Go to https://jlcpcb.com/ and upload your gerber files in zip or rar format (there is also tutorial how to export gerber). If you want panel select "Yes" for "Panel By JLCPCB" and enter how many boards you want in a row and column. Im just really surprised by quality and looks of the pcbs. If you are interested in the project here are some video clips and soon there will be clip of assembling one with board from jlcpcb. https://jlcpcb.com/https://jlcpcb.com/https://jlcpcb.com/ Quote Link to comment Share on other sites More sharing options...
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.