Recent content by ilianaboone

  1. ilianaboone

    Anyone identify this connector?

    51-pin FPC/FFC connector
  2. ilianaboone

    Ultra-Low Power and Long-Range Design of LoRa Modules

    In IoT projects, engineers often face a dilemma: achieving long-range communication typically requires high power, leading to soaring energy consumption; conversely, prioritizing low power consumption often results in significantly compromised communication range. This module remains in a deep...
  3. ilianaboone

    How Does LoRa Mesh Self-Organizing Network Technology Achieve Ultra-Long-Distance Coverage?

    In environments such as large campuses, farms, or underground utility tunnels, traditional point-to-point LoRa communication often encounters "signal dead zones" due to physical obstructions. The core advantage of a Mesh network lies in its "decentralization" and "self-routing" capabilities...
  4. ilianaboone

    CANopen Core Protocol: A Comprehensive Guide for Electronic Engineers

    As one of the most widely used fieldbuses in industrial settings, CANopen has become the preferred communication protocol for motor control, robotics, and automated production lines due to its flexible configuration, reliable real-time performance, and broad device compatibility. This article...
  5. ilianaboone

    How to improve the reliability of RS485 communication?

    In the development process of modern industrial automation and intelligence, RS485 communication, as a commonly used serial communication standard, is widely applied due to its advantages such as long - distance transmission and support for multi - point communication. However, in practical...
  6. ilianaboone

    Frequency generator to shut off street lights.

    About- Blocking the Photoresistor Your mention that touching the photoresistor can turn off the street lamp makes sense. Photosensitive street lamps mainly rely on photoresistors to sense the ambient light intensity. The resistance of a photoresistor changes with the light intensity. When...
  7. ilianaboone

    Outdoor positioning: RTK and GPS comparison

    Introduction Outdoor positioning technologies play a crucial role in various fields. Among them, RTK and GPS are two commonly used positioning technologies. This article will introduce the concepts, principles, and differences between RTK and GPS, and also showcase the application potential...
  8. ilianaboone

    How Can I Reduce EMI Noise in a Switching Power Supply?

    To reduce electromagnetic interference (EMI) in a switching power supply (SMPS), consider the following strategies: Optimize PCB Layout: Minimize loop areas and use a solid ground plane to reduce radiated EMI. Implement Effective Filtering: Use LC filters, ferrite beads, and common-mode...
  9. ilianaboone

    Why the Development of Blue LEDs Took Over 30 Years

    The creation of blue light-emitting diodes (LEDs) stands as a monumental achievement in semiconductor technology. While red and green LEDs were developed in the 1960s and 1970s, respectively, the blue LED eluded scientists for over three decades due to several significant challenges. 1...
  10. ilianaboone

    Implementing MQTT Communication with Mosquitto

    Mosquitto is a lightweight open-source MQTT (Message Queuing Telemetry Transport) message broker, widely used for efficient communication in IoT and distributed systems. Below is a structured guide to its deployment and usage Core Features Lightweight: Optimized for resource-constrained...
  11. ilianaboone

    ZigBee 3.0 Wireless Module - Low Power, Mesh Networking, Self-Healing!

    From smart homes to industrial automation, healthcare, and agriculture, ZigBee technology offers efficient solutions with its low power consumption, high reliability, and easy scalability. Ebyte is excited to introduce the EWM181 series—a low-power ZigBee wireless module designed for easy...
  12. ilianaboone

    A few questions about antenna gain

    Hello, I’m currently studying antenna design and have a few questions about antenna gain. Antenna Gain: I understand that gain refers to the antenna’s ability to convert input power into radiated power, but some sources also mention “directionality” and “efficiency” in the context of gain...
  13. ilianaboone

    Understanding the Differences Between Development Boards, Microcontrollers, and ARM

    In the rapidly evolving world of electronics and embedded systems, terms like development boards, microcontrollers, and ARM frequently surface. While they are interconnected in the realm of hardware design and programming, each serves distinct purposes and possesses unique characteristics. This...
  14. ilianaboone

    ECAN-E02 Single Filter CAN Hardware Filtering Explained

    1. What is CAN? Controller Area Network (CAN) is a standard protocol used for communication between electronic devices in vehicles. CAN filters are used to filter the messages received on the CAN bus, ensuring that only specific data frames are processed. In CAN communication, the...
  15. ilianaboone

    How to Make a Digital Walkie-Talkie

    Walkie-talkies, known for their ability to communicate without the need for network support and without incurring phone bills, have made our lives much more convenient. Typically, a walkie-talkie consists of an antenna, main unit, battery, and charging dock. There are three main types of...
See more
Top