Search results

  1. mozikluv1

    capacitance meter

    :)hi, do you still have the schem of your cap meter, i would like to make one. can you email it? my email add: [email protected] thanx ;D
  2. mozikluv1

    reversed bias oscillator

    ??? can you provide me the formula on how 550hz was arrived at? the formula i used for freq. osc. is 1/2piRC. thanx :)
  3. mozikluv1

    LM350 Variable Power Source

    :)derfly another suggestion, you can try LM12 its a new device by National Semi. from what i can remember it operates ate 28v 5A. try to check this site http://www.national.com ;D
  4. mozikluv1

    LM350 Variable Power Source

    :)hi there DerFly, you hit it rite, you have current overload on your 350. my suggestion is this, determine first your current need, if its 8A then get the needed parts you need, if its 12 A, then do it, there are plenty of circuits in the web, but if you want some allowance for some experiments...
  5. mozikluv1

    Free sample chips!

    ;D hi there mixos, this is what i have been waiting for, you're right dont easily find the free button sample. thanx, thanx, thanx for this post. more power to this community. :)
  6. mozikluv1

    Transistor tester

    :) sorry if i sound too naive about handling cmos. 1. how about if i have to align the pins to the socket, what do i use to straighten the pin. someone advise that i can use a long nose plier provide the plier is insulated and i dont touch the pin directly, also they say i dont have to worry...
  7. mozikluv1

    capacitance meter

    :D thanx mixos!
  8. mozikluv1

    Transistor tester

    :)to mixos: i now have all the parts of the transistor tester project, but my problem is installing the cmos device without damaging it. i know its sensitive sto static energy. is there a simple way of installing it? ???
  9. mozikluv1

    capacitance meter

    :) re your capacitance meter project: 1. can this meter measure the "effective series resistance"? 2. whats the equivalent of OA47 diode in the IN40xx. thanx Project Link: http://www.electronics-lab.com/projects/test/006/index.html
  10. mozikluv1

    CD4093 and TA8184 datasheet

    ;D to mixos: thank you, thank you for the 2 datasheets specially the TA8184. again thanx :D
  11. mozikluv1

    CD4093 and TA8184 datasheet

    :)can anyone point to what site can i find the datasheet for CD4093 & TA8184 (vol/tone ctrl). thanx
  12. mozikluv1

    Action

    :)to mixos: can i possible post a table on case style & pin configuration of common thyristors? this table has helped me a lot on identifying the anode, cathode & gate. thanx. :D
  13. mozikluv1

    Home-Brew tinkering

    ;Dhi! i hope you can can help me out on this, i have come upon an audio amp which i believe would be a very good one, however it gives out 120w rms and is supplied with +/-56v which i dont need. what i want is a lower output and a lower supply level say 18-24v. i am planning not to use the same...
  14. mozikluv1

    Transistor tester

    ;Dthanx my friend, will let u know of the result!
  15. mozikluv1

    Transistor tester

    ??? thanx for the datasheet you sent. however a good friend also sent me datasheet on this chip made by fairchild semi. CD4027BC. the one you sent was CD4027B by texas inst. i have seen both internal circuitry and each one differs. the BC type use single inverters while the B type uses 2 series...
  16. mozikluv1

    Transistor tester

    ??? am very much interested in building this transistor tester project of which the author i believe is randy linscott as you have presented. however, before i do so, i would like to clear up some doubts, 1. is IC4027 a dual JK master/slave flip flop w/set-reset? 2. where can i find the...
  17. mozikluv1

    audio amp power output formula

    :)thanx my friend, i will surely visit the site you have provided. :D
  18. mozikluv1

    audio amp power output formula

    ???Does anyone know if there is a formula to compute the power output of an audio power amp which is operating in the Class A or AB mode. Pls. help me. Thanx. :D
Top