Search results

  1. windoze killa

    audioguru fm transmitter

    The field strength meter should be about 1m away from the transmitter antenna. You should not be getting V/m, it should be more like mV/m.
  2. windoze killa

    Parallel port interfacing

    As far as which pins on the parallel port goes it will depend on your software that is going to read the port.
  3. windoze killa

    antispeed gun radar

    Well this design is very simple and its not really the design that I have developed just its implementation. It is call a Speedometer. You look at it and....... Scroll down.... Keep scrolling.... A but more...... DON'T SPEED
  4. windoze killa

    How to add a mute system to an OpAmp

    Can you supply a schematic.
  5. windoze killa

    Digitally selected outputs for LM317

    To be honest we haven't noticed it or paid much attention to it. Being in R&D we tend to work on the premis that if it works, leave it alone or if it aint broke, don't fix it. We came up with the design and it seems to work well. When we have trouble we will investigate more
  6. windoze killa

    antispeed gun radar

    I have developed the perfect device to avoid being done by Radar guns. An amazing side shoot is that this also works on the old amphometer tapes on the road. Anyone interested just respond here.
  7. windoze killa

    Water Tank Water Level Indicator

    The tank is underground. Bit hard to see a tube. You could try using something similar to a fuel tank gauge but on a larger scale.
  8. windoze killa

    Digitally selected outputs for LM317

    We current use ULN2003 chips for a very similar application and they work very well.
  9. windoze killa

    Digitally selected outputs for LM317

    You could use something like a UNL2003 darligton driver chip. It has 7 outputs. Would give you more combinations than you could ever need.
  10. windoze killa

    audioguru fm transmitter

    Pretty close to what I described. Does it work?
  11. windoze killa

    audioguru fm transmitter

    If this is a standard FM band transmitter then I would say they are air wound. I would wind about 10 turns of 22AWG enameled copper wire on a 4 to 5 mm former. Then remove the former. It is about the size of the coils in the transmitter I have.
  12. windoze killa

    RMS

    Thats not quite correct. Unless otherwise specified all power measurements (RMS or Peak) are referenced to a sinusoidal waveform. PMPO is about the only power measurement that doesn't. It is what you find on PC speaker systems. Little tiny speakers that cost $30 and can handle 600W PMPO. I am...
  13. windoze killa

    Making a 4gb memory stick

    As far as I know all memory sticks have a micro on them to control the read write of the memory. It also has ID info to tell the PC what it is. So I guess the answer would be yes, if you know how to write the code and interface it.
  14. windoze killa

    ADC Circuit

    ADC chips like that can be interfaced directly to the port. You may need a buffer chip for some of them. You should then be able to read the data from the port with some software.
  15. windoze killa

    ADC Circuit

    You don't need to use an AVR or PIC. There many many ADC and DAC chips on the market. Analog Devices has heaps that will do the job. Browse their site for datasheets.
  16. windoze killa

    made a stun glove need help

    Not sure about the legalities of these but it sounds fun.
  17. windoze killa

    to anyone new to robotics

    Then keep them on a decent charger. They will be ready to use at all times.
  18. windoze killa

    amplify the power (infrared)

    You could also try using more IR LEDs to increase the amount of radiation.
  19. windoze killa

    to anyone new to robotics

    Well I guess for a single battery purchase alkalines are cheaper. Most people don't consider the recharging advantages they just see the per item cost. Also the cost of the charger may put some people off. For example, here in Oz a packet of 10 Eveready Energiser AAs costs about $12. A packet...
Top