Search results

  1. S

    Help Me/ hook up a forward-stop-reverse motor cont switch on a 220volt mill machine

    Hello, yeah I hear a centrifugal switch once you turn motor off that I hear click when it was running also I think you are on to something about this magnetic switch, I found a few diagrams of very similar machines, they have other safety switches on them and what not but its the same motor, I...
  2. S

    Help Me/ hook up a forward-stop-reverse motor cont switch on a 220volt mill machine

    So I ended up using a meter to get the switch so no wires would co-mingle when the switch was used Forward: sends power via Z2 and U1 up to the motor Off: no lugs are hot on switch (none of the ones I have U1, U2 or Z2 hooked to) Reverse: sends power via Z2 and U2 up to the motor...
  3. S

    Help Me/ hook up a forward-stop-reverse motor cont switch on a 220volt mill machine

    I got slightly different readings with a meter on the switch as to your reverse connections: Here's what I metered new switch at: Forward: S – connects to .....6 & V R- connects to ..... 5 & U Reverse: S- connects to ...... 5 & V...
  4. S

    Help Me/ hook up a forward-stop-reverse motor cont switch on a 220volt mill machine

    Found this wiring diagram for my mill
  5. S

    Help Me/ hook up a forward-stop-reverse motor cont switch on a 220volt mill machine

    The old switch has no markings and the some of the contacts fell out and its not in time anymore with where its supposed to be since the limiting cog fell out that limited the switch to 45 degree's and it spun and that can be put back in several different ways, so a meter on it wont work since...
  6. S

    Help Me/ hook up a forward-stop-reverse motor cont switch on a 220volt mill machine

    I have a bad switch on my machine and was given this new switch by a dealer of these milling machines, but its very different looking in the way its hooked up than the one on my machine Machine is a 220 volt 1-1/2 hp milling machine (for milling down metals) What I need to know is where to...
  7. S

    Help me with my circuit (pictures included) Im not very smart about circuits

    Well for some reason when that circuit with the 10k resistor is placed closer to the device end it triggers the desired mode on the device, but does not trigger the desired mode in the device if you place that 10K at the other end of the cable nearer the power supply when the power supply is...
  8. S

    Help me with my circuit (pictures included) Im not very smart about circuits

    Thanks that would be great, please give me what the part number would be on the switch and/or anything else that needs connected. The voltage is 0 .... the device I have listed need to be plugged in for that to generate any current on the trigger wire, so once its plugged in is when it...
  9. S

    Help me with my circuit (pictures included) Im not very smart about circuits

    Sorry I messed up the voltage on that id wire is 1.67 volts DC when measured from device to ground
  10. S

    Help me with my circuit (pictures included) Im not very smart about circuits

    I have 2 pictures, the first one is what I have now, the second one is what I want to do. I don't have knowledge of the current part numbers of the transistor or mosfet I would need and how to excaclty hook it up to make this work, I think this would be pretty easy for someone that has...
View older results
Top