Search results

  1. baldguyfromblackpool

    Architecture of mass produced cheap welding set

    I'm no longer trying to fix this Parkside PISG80A1 inverter stick welder because the cost of a brand new replacement coupled with the speed of Amazon next day delivery makes repair pointless. I still have a brain itch about what happened when it broke. I was up a ladder welding a tractor door...
  2. baldguyfromblackpool

    Short range cat detector

    What cheap motion detector did you use? I do like the flexibility of the HCSR04 idea but could the complexity of the microcontroller could be avoided by something more off the shelf? I'm split now between getting something rigged up and working relatively quickly, and taking time over the...
  3. baldguyfromblackpool

    PCB Manufacturing — Complete Beginner’s Guide

    I've only ever done really simple, one sided, self designed boards for very basic hobby projects but I manage with an image editor (I use GIMP), a laser printer, and heat transfer paper. You draw your design, print it out, then iron it onto the blank board before soaking it in etchant solution...
  4. baldguyfromblackpool

    Short range cat detector

    I'd briefly seen OpenCV in passing on my Googles, really interesting, but probably overkill for this project. Still fascinating though. That's something I'd love to play with for fun if I ever get the workshop straight and get enough time. Not too bothered if detection is indiscriminate. To...
  5. baldguyfromblackpool

    Short range cat detector

    It's the that I'm not sure about how to do I do love 555's though
  6. baldguyfromblackpool

    Short range cat detector

    Great idea, will try that as a training aid
  7. baldguyfromblackpool

    Short range cat detector

    I have a problem with cats jumping up on the kitchen worktops in the night, and leaving a mess. I thought about making up some small devices with a limited range which could detect the proximity of a cat within no more than about 3 feet, and then trigger an alarm to scare off the cat. What...
  8. baldguyfromblackpool

    Help with pin connector identification

    Not sure if helpful or not https://dam.bakerhughes.com/m/23d2a1de24360b13/original/3300-XL-8mm-Proximity-Transducer-System-Datasheet-141194-pdf.pdf The datasheet mentions 'Springlok' terminal blocks These particular ones came up on a search for "Springlok test plug"...
  9. baldguyfromblackpool

    Connector identification

    I just followed on from the previous post & it seemed to work out! Don't forget to check the pitch etc, and the soldering configuration before ordering. Some differences you might be able to work around if you're good with a dremel etc Another possible option might be, replace not only the...
  10. baldguyfromblackpool

    Distinguish FET from BJT from ? with DMM

    Thanks - there were 5 in particular I had a close look at the datasheet, in that list. Couldn't find a 100% perfect match but I'm pretty sure now, what I've got is something very similar. I thought they were going to stop at toasters and lightbulbs, but now even discrete transistors have...
  11. baldguyfromblackpool

    Distinguish FET from BJT from ? with DMM

    My cheap plastic calipers measure 2.8mm, so I think SOT-23 By removing one 10k resistor from the board I figured I then had the part isolated and fully out-of-circuit, albeit with a couple of components still 'hanging off' each leg - a relay coil with parallel diode on the source followed by a...
  12. baldguyfromblackpool

    Distinguish FET from BJT from ? with DMM

    A follow on from my earlier thread about copying a relay controller. I have one final 3-legged SMT component left that I don't fully understand. It's in a circuit position that makes it reasonably clear which should be the gate, source and drain (or base, emitter and collector) Measured...
  13. baldguyfromblackpool

    3296W series multiturn trimpot

    Thanks Olivia. Years and years ago as a boy in an electronics shop on Dale st. in Liverpool, the guy behind the counter told me that all trimpots are linear, but that was in the late 70's! Hopefully with a bit more knowledge about the circuit the trimmer is no longer needed but, good to know...
  14. baldguyfromblackpool

    Connector identification

    Following on, I ended up on a search for "mista 6 pin (5+1) blade pcb mount battery connector" and got one that was 100% perfect, if it wasn't back-to-front :-( The mirror image part must be out there somewhere, it's a case of finding the magic incantation for Google...
  15. baldguyfromblackpool

    Connector identification

    Maybe they'll tell you if you ask, or supply one direct. Doubt it but maybe worth a try? https://www.gtech.co.uk/support/airram-mk2.html https://www.gtech.co.uk/contact
  16. baldguyfromblackpool

    3296W series multiturn trimpot

    I managed to get hold of one of the interface boxes they used to make. It's a circuit board immersed in a block of potting compound. I need two of these units, so I decided to carry on with trying to make my own, but use the one original unit I managed to source to reverse engineer & be sure my...
  17. baldguyfromblackpool

    Burnt component on module

    I'm thinking, my thinking's been wrong. All this nonsense about FET modes. Hypothesis.. The N type enhancement FET is right for the job, and all it's doing is switching the power on and off. Not somehow reversing the current which I'd been vaguely ruminating on. Repairs so far are all good. The...
  18. baldguyfromblackpool

    Burnt component on module

    Maybe 75N85 was a depletion version of 75N75? Looking at the back side of the board on the archived page, I think the hole for the original part's gate pin, does match up with the gate pin on FQP20N06L. Not sure about the drain & source but I suppose it probably wouldn't work at all, if that...
  19. baldguyfromblackpool

    Burnt component on module

    Some info available at an archived Fiero forum. They suggest as possible replacements, BUZ24, 2N6763, 2SK561, 2SK906, 2SK1429, NTE2389, or BUZ10S2 .. I think these are all N-type enhancement mode FETs bar a couple. It's an archived site so even these equivalents, might be in need of updating...
  20. baldguyfromblackpool

    Burnt transistor/resistance

    Just some Googles, Maybe B&Q / Kingfisher / Blyss / Challenge, Dehumidifier D002A ? Found a couple of similar boards, but they're not quite the same https://shorturl.at/SZo3u https://shorturl.at/K6bWo Broadly similar power boards in D003A, D015B, D016B ? Unfortunately not much help to give...
Top