Search results

  1. B

    Radiogram record player very faint sound

    If the radio works, the amplifier must be ok so forget poking around the valves. More likely the stylus or the selector grubby contacts.
  2. B

    Thread gauge for extremely small screws?

    Difficult to see the chart let alone the screws......!!:rolleyes:
  3. B

    Bench psu build

    Think you've been around long enough now to know....show what you have.
  4. B

    Current drawn by a drone motor

    One would naturally ask, why do you need to know, however, it's a simple process to connect an ammeter to the battery. As they say, suck it and see.
  5. B

    JCS12N65ST Mosfet

    Seems you have already made an "attempt" to remove it or whatever........I'm guessing you found it not as simple as would first appear. AND, you are well on the way to destroying the board.
  6. B

    help with a 12v control circuit

    Quite possible to set up a basic latch circuit (not a mechanical latching relay as such) with your existing pressure mat triggering the alarms. Then it would be a simple matter of an internal "secret location" alarm reset button. With this arrangement one could jump up and down on the pressure...
  7. B

    A bicycle dynamo with 6v and 6w?

    Aghhhh...!! Didn't they teach you to just "get back on again"..!!! ???
  8. B

    Transistor

    I'd say given the other triacs in the same locality and their markings, you are pretty much on the money. Actual type...who knows, perhaps a oem number...again who knows...Op first shows TA3 and then TA4...???? Is the good one shown the same as the "blown one we do not see"...??
  9. B

    help with a 12v control circuit

    As far as I can see you already have your voltage pulse....the mat switch will turn off again after one steps off the mat....all-be-it a second or so pulse.
  10. B

    help with a 12v control circuit

    Need more info on what you have.............
  11. B

    A bicycle dynamo with 6v and 6w?

    Strap a 600w solar panel to your back............just keep downwind.:D:D
  12. B

    help with a 12v control circuit

    several ways...possibly 555 simple enough. One can get the mono stable modules online Ebay etc for a couple of dollars. You could use a transistor setup but the above are already made so...... https://www.ebay.com.au/itm/185460563580 What does the rest of your circuit look like as it might be...
  13. B

    Can an electronic circuit physically expand and shrink in Size?

    Sure are some crackpots around...........
  14. B

    Physics Related to Electricity Questions

    Most have no understanding, nor any chance of, even the basics. Why complicate matters, just open a bull s**t post.
  15. B

    Power Calculation

    I'd get a new switch...that one would eventually burn out.
  16. B

    doubt joystick battery

    yes, carbon cells leak and corrode......... rechargable nicad or nickle metal, not so much but suffer from black wire......lipo's puff up and sometimes explode rather violently.....you have to live with what is out there and take appropriate action to avoid the downfall of whichever. Or get a...
  17. B

    A bicycle dynamo with 6v and 6w?

    Are you pedelling this particular bicycle with 2 dynamos attached (also @ max output for at least 1 hour).......???
  18. B

    Thread gauge for extremely small screws?

    Cannot imagine it. Sighting the thread guage is required to differentiate between thread pitches and if the screws are as small as you say, then would be almost impossible to see, let alone be able to place the guage on the screw thread accurately.
  19. B

    Choosing the right current sensing resistor.

    Makes one wonder about the working or rather, non-working remaining circuitry.
Top