Search results

  1. ante1

    bus ......heeeeelp

    ??? What ???
  2. ante1

    Need help with a DMM

    Check the voltages on the 7106, first the supply then the inputs. If you are lucky it
  3. ante1

    Schematics Variable current 12v 60A to 0A

    Dazza, Yes I know the transmitter kind is analogue (0 to X) and the switch is digital (0 or 1). I just thought that in a corrosive environment the digital would have a better chance of surviving thus be more reliable. But this is just me guessing cause I don
  4. ante1

    HELP ME - I KNOW NOTHING!!

    Hi Paul, There is one thing you should know, Don
  5. ante1

    ERRORS

    I agree, sometimes it helps after a few tries but it takes two to three minutes to reload each time and I can
  6. ante1

    Auto electronics ?, 24V gauges in 12V circuit

    There are many things that can go wrong here but sometimes the gauge is the same for 12 and 24 Volts (except the bulb) it
  7. ante1

    555 timer help

    Sorry but 24Volts will kill the 555 I one second!
  8. ante1

    Something special for the dog!

    Les, Welcome to this forum. This sounds like an interesting project for a dog owner like myself. At this stage I don
  9. ante1

    ERRORS

    Dazza, Audioguru, Trigger, It
  10. ante1

    ERRORS

    Hi Mixos, Is it just me who
  11. ante1

    Want some reading?

    Steven, Are you sure you tried this one: http://www.ibiblio.org/obp/electricCircuits/index.htm I just did and it worked OK!
  12. ante1

    Make a Microwave oven on a small-scale

    Trigger, I like the self-programming unit, didn
  13. ante1

    Auto electronics ?, 24V gauges in 12V circuit

    Hi BBC, Can you supply more info on what kind of instruments it is you want to use? Is it oil pressure or petrol gauges and do you also have the transmitters for them?
  14. ante1

    Schematics Variable current 12v 60A to 0A

    Dazza, I don
  15. ante1

    Measuring voltage output of Serial/LPT port

    MP, You are correct, that
  16. ante1

    Measuring voltage output of Serial/LPT port

    MP, The MAX232 alone consumes >=5mA at idle so this is not safe to do I think.
  17. ante1

    Schematics Variable current 12v 60A to 0A

    Dazza, Why two extra alternators, you already have one in a vehicle and you have the battery? Or you are going to create a second 12Volt system just for the reactor? Then I can see why it will be tight under the hood (or maybe you say bonnet)? OK about the efficiency, unfortunately there will...
  18. ante1

    Convert 0-30V 3A PSU to 5A or more

    Kain, The PSU looks good, I can see it
  19. ante1

    Measuring voltage output of Serial/LPT port

    Hi Rhonn, You should avoid messing with the ports like that; it can cost you the motherboard. :o Just get 5 or 12Volts inside from a free device power connector its much safer. Don
  20. ante1

    Convert 0-30V 3A PSU to 5A or more

    Hi Kain, If you want to put some extra money in the project you could go for water-cooling. The psu will not be very mobile but it will be immortal for sure! ;D
Top