Search results

Search Forums New Posts
  1. Maglatron

    PWM on 12volt winch?

    so now I am coming to buy one of these geared AC motor with VFD control can you guys recommend me one that turns 0 to 500RPM please by the way guys my internet time has dramatically decreased but I'm still around should be back on regularly soon!
  2. Maglatron

    help with IR2110 chips

    ok I'll do some measurements
  3. Maglatron

    help with IR2110 chips

    ok cool I want to add the output of all 8 coils in parralell a magnet passes all the cores at once, none in series, they are all in phase
  4. Maglatron

    help with IR2110 chips

    so I'm on the part where I rig the coils up and am struggling to sus it out if I get the needle on the meter to move to the right (which I assume is positive) as the magent approaches - on all of the coils and then which ever the the black lead is on, they need to be connected together, and all...
  5. Maglatron

    help with IR2110 chips

    so now I have made the coils mounted symetricall and going to mount the driving motor (drone motor) and after that I will be putting in the cores to the coils (welding rods) I have to say its looking proper!
  6. Maglatron

    help with IR2110 chips

    so I'm remounting the first set of two coils and have finished the other 3 sets after that mounting the drone motor, I get an hour today
  7. Maglatron

    help with IR2110 chips

    I'll take that :)
  8. Maglatron

    help with IR2110 chips

    :D do you like my machine? so I remember how to wire the coils. If I remember correctly I pass the magnet past each coil and look at the deflection of the needle on my analog meter and wire all the (positive wire together) and (all the negative together) or should I say wire together the wires...
  9. Maglatron

    help with IR2110 chips

    making progress! here a couple snap shots, need to put on the last set of coils and secure then I will be mounting driving motor!
  10. Maglatron

    cheap cnc milling machine not controlled by computer

    https://www.amazon.com/MYSWEETY-MultifunctionWorktable-Compound-Drilling-Adjustme/dp/B07PCHXFYN/ref=sr_1_3?dib=eyJ2IjoiMSJ9.-X_tZLSL2HTlKbYCnWTsWV-_IWXsgGbeNzdsBU-5D9LOA24bjf041DXSqM8rrZSQE-Fd1uMsbHobyau7KcFRHaxWzomGuI29zSVxWXNCSSwG4-1GbiAmtd0z-9DsctpPw5wQvgFmiW64LTTh1iGkPwQ9ALeBF1JWW_kkPEq_MsbbR...
  11. Maglatron

    help with IR2110 chips

    So I'm resuming this thread, I'm rebuilding the maglatron I now have 20 magnets either side of the wheel (doubled up) and 8 coils and the wheel is heavier will provide images soon I think I am going to need to modify the inverter that I made with the IR2110 circuit to cater for the new design...
  12. Maglatron

    cheap cnc milling machine not controlled by computer

    https://littlemachineshop.com/products/product_view.php?ProductID=4962&category= this is what chatcpt recommends but it's a bit over budget!
  13. Maglatron

    cheap cnc milling machine not controlled by computer

    so I looked at some things on the web any suggestions for a mill that can cut mild steel like the laminated steel in the rotors in the motors I am modifying for under £300 please, thanks
  14. Maglatron

    cheap cnc milling machine not controlled by computer

    ok that's cool, thanks Mr danadak
  15. Maglatron

    cheap cnc milling machine not controlled by computer

    so I found these which might be better to suit my needs but I think they're a bit too small and expensive...
  16. Maglatron

    cheap cnc milling machine not controlled by computer

    well thats because I don't really know what I'm on about maybe I don't need it to be computer controlled, after thinking about it I think I just need a manual miller if that is a thing I want to mill out a retangular shape 15mm deep x 27mm x 40mm in the armature after stripping it of the wire...
  17. Maglatron

    cheap cnc milling machine not controlled by computer

    I want to de-wire a rotor from a washing machine motor and mill out a rectangle on either side, 40mm wide 15mm deep (in towards axle) and 27mm the remaining direction the picture plates with holes are acctually neo 52 and they and 40mm x 13.5 x 5mm!!! will the miller in question be up for the job??
  18. Maglatron

    cheap cnc milling machine not controlled by computer

    so do you have a machine that runs with arduino please Mr Minder, thanks
  19. Maglatron

    cheap cnc milling machine not controlled by computer

    thanks can you point me to the miller you are refering to, cheers Mr Minder
  20. Maglatron

    cheap cnc milling machine not controlled by computer

    I didn't find that very helpfull but am thankfull for the suggestion anybody else?
Top