Search results

Search Forums New Posts
  1. S

    Trouble identifying a MOV

    Google one until you find what you need, a lot of mfgrs make them. Bourns MOV-14D330K 33v 10% Tol, Littlefuse V33MLA1206Am 33V Epcos (TKD) makes them and many others. If I were you, I'd replace BOTH of those MOV's, not just the one. Good luck.
  2. S

    Soldering iron trouble.

    Tha fios agaibh is on-target here. The soldering tip is the critical item when soldering. Electronic supply stores in my area carry little round tins of 'tip tinner'. I've had a block of sal ammoniac that I've used for years. You have to clean the tip, I use emery cloth to get it completely...
  3. S

    Need some help to Identify a part please

    Duh. I gotta go with Hellas Techn and davenn on this one, if you're counting votes.
  4. S

    Trouble identifying a MOV

    First-off, they don't put MOV's in series with anything. It's probably wired in parallel (or this may explain why it was blown). I too get annoyed at the markings on MOV's, everybody marks them using their own numbering system and it's tough tracking the mfgr down. Here's my educated (barely)...
  5. S

    Need help to identified component on my circuit board, Thanks.

    My guess is the mfgr said it was 'obsolete', as in no longer available. (As opposed to 'absolute')
  6. S

    Super Bowl

    People watch the Super Bowl to see the commercials, there just weren't many good ones this year. But yes, the padded-chest part of the team WAS worth watching. It is hoped by many that they 'played' AFTER the game.
  7. S

    Help Changing A Switch

    Have you considered removing the switch on the hub and hard-wiring the hub contacts into your ignition accessories switch? Your mentioned option is to go to an electronics supplier and find a longer version of your black push-button. (The black caps are removable/replaceable)
  8. S

    A long overdue courtesy reminder .....

    Nuts, I'm an ex-Marine. I'm guilty of this occasionally due to the fact that Marines can't read, we just look at the pictures. I see davenn's point and will try to do better. It's good though that this point has been made, and hopefully others will take it to heart. I come to electronicdspoint...
  9. S

    Ancor 703030 die sets for molex?

    Did you try Google Ancor and checking their website or contacting them? They should be able to tell you who distributes their products.
  10. S

    Thanks for the help

    Can't access them from my computer (my issue, nothing you did wrong in the post), but thanks for letting us see the results of your work. A picture is worth a whole lot here.
  11. S

    Alternative Actuator Choices?

    I'm like Bluejets. If we have no idea what you're trying to do, I don't know how we can offer help. Are you sure the company didn't give you this task realizing they didn't think it could be done?
  12. S

    Bose Acoustic Wave System II No LCD Display

    First thing I'd check is the display driver integrated circuit. If you're unsure which one it is, Google the part numbers on the IC to identify it. If it's inexpensive, I'd try replacing it to see if that solves your problem.
  13. S

    Black patch (spot) in center of red led light

    Sounds like a pretty specific problem. It might help if you supply a manufacturer name and part number of your device. With the limited information you supplied, my guess would be the physical construction of the light emitting diode itself, and that fact that this could be common to most if...
  14. S

    Radio for the space.

    But what if the aliens use something other than radiosignals to communicate?
  15. S

    Mitsubishi M VR700 no audio output

    First thing I'd check is the power output transistors.
  16. S

    DVR STOPS RECORDING

    That would be my first thing to check. I'm going to hope somebody else sees this post and jumps in here. I am completely unfamiliar with hdmi input. My experience with your symptom, is that somewhere in the wiring, at least one cable is not in the correct connector. hdmi may do something I'm...
  17. S

    DVR STOPS RECORDING

    The problem is how you've wired the system up. Devices nowadays will not operate if they do not see an incoming signal. Somehow, you've wired your system so the DVR is not seeing an incoming signal when you shut off the TV (which is probably supplying the signal to the DVR). Just sit down and...
  18. S

    Need help finding a replacment screen

    That's not unusual because mfgrs move-on from one model year to the next ('upgrading') the display. If you're pretty sure you have the right part number for the screen you need, your only option is probably to check possible places where you might be able to find one. eBay, Google Search...
  19. S

    Need help finding a replacment screen

    Did you try Googling the part number on the screen, you might get some hits on it?
  20. S

    EMS/Police Lightbar conversion

    My brother bought some of these light bars from a local police auction. First-off you should know that they weren't just traded-in for replacements by the police department for no reason. They're typically defective in some way, and that's why they were taken out of service. You may be wiring...
Top