Search results

  1. steven2

    Rocket Staging Circuit

    :)look at the topic in the high voltage stuff section, called high voltage photo flash capacitor charger, it dosent just charge photo flash caps but all kinds of high voltage capacitors , the ignition coil driver version cap charger is what you may need its very simple to biuld
  2. steven2

    turn wind into an electrostatic generator?

    :)au upside down bycical with plastic wrapped between some of the spokes . so they look like wind propellers so when the wind blows the wheels spins and so dose the bycical dynamo generator, called the bycical wind wheel generator is simple
  3. steven2

    Inverter Circuit 12V DC to 230VAC Sine Wave

    :)the latest test with the thicker wire all installed after the last picture was taken gave me the total voltage output of 156 volts ac which dropped to 152 as the one transistor and the whole heatsink got hot so i adjusted it down to 150 volts ac.  which would be ok as it dident heat the...
  4. steven2

    Inverter Circuit 12V DC to 230VAC Sine Wave

    :) heres the latest results of the super simple inverter circuit,       notice the size of the holes in the circuit board for the wires , they can only take certain size wires ,of certain gauge. so the holes would need to be enlarged for a bigger gauge wire which i did latter.  the 10 ohms...
  5. steven2

    Inverter Circuit 12V DC to 230VAC Sine Wave

    :)heres the transformer i got allready  for it just have to drill the heatsinks and wire it up and test it
  6. steven2

    foam wire cutter

    heres the whole setup and it makes more hydrogen from one electrode than it dose ,oxygen on the other electrode , and when i turn it up it goes faster
  7. steven2

    foam wire cutter

    ;) now for a test useing the output voltage if its 3 amps  like the transformer say it is, first i made a water gas circuit , rated to handle 6 amps at 1000 volts , well thats the voltage rateing of the bridge rectifier, i dont have any 24uf non electros around so i settled on 0.47uf green caps...
  8. steven2

    Inverter Circuit 12V DC to 230VAC Sine Wave

    :)heres the picture of the tesla transistors that came with it
  9. steven2

    Inverter Circuit 12V DC to 230VAC Sine Wave

    http://www.jaycar.com.au/              heres the link to the jaycar electronics catalouge its in
  10. steven2

    Ignition Coil Dirver problems

    :)my ignition coil  driver runs off the timer circuit and the 2n3055 is in it to
  11. steven2

    Inverter Circuit 12V DC to 230VAC Sine Wave

    thankyou for that diagnostic audio guru , it sounds like that kit dont deliver what the makers say it dose, 140 watts they say , well anyhow ill find a use for what i can get out of it when i get the transformer and heat sinks, the 2 transistors that originally came with it had tesla written on...
  12. steven2

    Inverter Circuit 12V DC to 230VAC Sine Wave

    hey mp i brought the invertor kit as i was ciurious as to how something so small would do what they say it dose , ive had an inverter once but it dident put out enougth current to power a drill, in fact it just barely turend it and it lite a house hold globe only dimly so i wonder what this...
  13. steven2

    foam wire cutter

    :)sarma thankyou for your input , ill try that when i make the second one  if my calculations and theories for my planned  hydrogen from water exsperiment  goes ok  . the the other part where the nichrome wire goes to cut foam with ill be leaveing that out for the time being in favour , of...
  14. steven2

    foam wire cutter

    :)thankyou samma, my brother biult one from these schematics and it works great to the t and he has a construction setup for the nichrome wire and a tension spring to and when the wire gets hot , when you adjust the tempiture it bows and he has no problems at all  as the spring keeps the wire...
  15. steven2

    Inverter Circuit 12V DC to 230VAC Sine Wave

    hey guys the inverter i posted was a kit from jaycar electronics
  16. steven2

    foam wire cutter

    :)all i need to make is the frame for the nichrome wire etc ill post this latter but i have better plans for this in the playing with hydrogen topic soon
Top