Search results

Search Forums New Posts
  1. steven2

    mystery blue water from hydroxy gas exsperiment

    :)thankyou ante i used  stainlless steel bolts in the yellow colourd hydroxy gas generator but it was when i used my small plastic can with 2 halfs of a diode  for electrodes. the diodes being silicon in nature was strange enougth however the blue watyer smells like my liuqiud plumbers glue to...
  2. steven2

    hydroxy gas power supply/separating oxygen and hydrogen from water

    thankyou monoman heres the latest, the water tank that supplys water to my hydroxy gas generator, isent big enougth to be able to gravity feed the water to the hydroxy gas generator setup so i used the bycical pump without the hose to pump air into the tank to force the water through, and allso...
  3. steven2

    mystery blue water from hydroxy gas exsperiment

    :)i have a few liters of demineralized water with a box of bi carb soda mixed in for my hydroxy gas generation and so i pourd some into a bottle which i use and when im finished i pour it back into the small bottle so its reused water with bicarb soda, here is another picture of bit pourd into a...
  4. steven2

    mystery blue water from hydroxy gas exsperiment

    :) with useing water i get black sludge, and  ive even had yellowy water, when testing out my hydroxy gas power supply, and ive been useing demineeralized water with bi carb soda mixed with it, and the colour of the water is allways the same when you use bi carb soda in it  the electrodes in the...
  5. steven2

    hydroxy gas power supply/separating oxygen and hydrogen from water

    :)heres a close up of the section with the bycical tube valve houseing its removable valve is inside
  6. steven2

    hydroxy gas power supply/separating oxygen and hydrogen from water

    you need to get the actual modified foam cuuting circiut biult and going to get ya gas from the water which is  important  so here is another handy peace you can biuld from very few parts to use, first the modified foam cutter makes small amounts of gas enougth to fill a balloon so it stands up...
  7. steven2

    hydroxy gas power supply/separating oxygen and hydrogen from water

    another thing i forgot to mention is that the left hand side of the hydroxy gas generator where 2 tubes go into the top one for water input and the other next to it for hydrogen output, well under the cap where the water input tube goes , that tube is exstended down to the water inside the...
  8. steven2

    hydroxy gas power supply/separating oxygen and hydrogen from water

    internet exsplorer problems is cutting me off from electronics lab when i upload pictures , and i have to go back in from the desktop
  9. steven2

    hydroxy gas power supply/separating oxygen and hydrogen from water

    :)here is more shots of the actual upgrades, . at the top of the gas and water chambers are plastic drink bottle necks with there screw on tops on. and lets start with the first tank the orange , water/gas flow tap which goes through the screw on top has a tube under it which runs to the inside...
  10. steven2

    hydroxy gas power supply/separating oxygen and hydrogen from water

    :) monoman i shall do what i can do to help, if ya read my post before this one  the pvc water pipes you should get from ya local hardware, depending on where ya are and they are easy to cut and heat so that they get soft, enoutgh to flatten out and use to cut round circles out of , to use to...
  11. steven2

    hydroxy gas power supply/separating oxygen and hydrogen from water

    :)thankyou ante and monoman, for the inspireing coments , ive upgraded the plant since and the tanks are now allso bublers to , all i need is drainage tanks which there isent any room to put them but ill think of something . as for useing a bycical pump etc etc to pressureize the gas well the...
  12. steven2

    hydroxy gas power supply/separating oxygen and hydrogen from water

    :)http://www.electronics-lab.com/forum/index.php?topic=9252.0 heres the shortcut to the electronic foam cutter just follow the modifications and use the bridge rectifier rated for around 35 amps or close to it
  13. steven2

    hydroxy gas power supply/separating oxygen and hydrogen from water

    :)the actual foam cutter circuit i used i posted it into one of the forums here before so the details are there . you only need to change the scr to a higher voltage one that can handle 35 amps and , use a 4.7 ohms 50 watt resistor in place of the 2x 10 ohms resistor then add a 1 ohms 50 watts...
  14. steven2

    hydroxy gas power supply/separating oxygen and hydrogen from water

    :) heres a picture of the flame, i took video footage of it with my digital camera and then downloaded it back onto pc then i slowed it down and then i used my digital camera to take stills from the stopped video pictures and then i loaded them back onto pc
  15. steven2

    hydroxy gas power supply/separating oxygen and hydrogen from water

    :) this is the most easy to biuld simple hydroxy generator and it mixes them both , and when i test it  it dosent even burn, if ya herd of a cold flame before
  16. steven2

    hydroxy gas power supply/separating oxygen and hydrogen from water

    :)
  17. steven2

    hydroxy gas power supply/separating oxygen and hydrogen from water

    :)here is the home made hydroxy gas plant under construction
  18. steven2

    hydroxy gas power supply/separating oxygen and hydrogen from water

    :)heres the home made hydrogen and oxygen plant nearly finished and the caps with the stainlless steell bolts, electrodes through them can be screwed off , they are water tight and are , virtually plastic drink bottle tops and allso the neck of the drink bottles to.  . in the picture only 2...
  19. steven2

    hydroxy gas power supply/separating oxygen and hydrogen from water

    :)im back and here is a modified foam wire cutter circuit  combined with a water gas circiut, etc for the separation of hydrogen and oxygen from water . now the brown colourd green caps are rated at 10uf each and at 100 volts , and as i started to increase the green caps, a few at a time, i was...
  20. steven2

    Rocket Staging Circuit

    ;) its ok i seen a rocket site for model rockets on the nets agers ago and they showed the details of one of those launchers and the nichrome wire with its initiator was in the stand and the initiator was at the tip of the nichrome wire top of where it bends  so that when it glows at the...
Top