Search results

  1. steven2

    Electronic parasite zappers

    :)when i made the printed circuit for the colliodal silver generator i found i missed a few tracks so i drilled a few holes for rest of the resister legs and i had to cut a track and re route it with tinned coper wire . here is the bottom view of the constant curent adaptor which i think can...
  2. steven2

    Electronic parasite zappers

    :)here is the bottom view of the colliodal silver generator circuit
  3. steven2

    Electronic parasite zappers

    :)here is the constant curent adaptor circuit top view
  4. steven2

    Electronic parasite zappers

    :)the small red led i solderd in is where an optional 50ma meter goes but this may not be needed , as the constant curent adaptor is attached to the outputs
  5. steven2

    Electronic parasite zappers

    :)here is the top view of the colliodal silver generator . printed circuit i made
  6. steven2

    Electronic parasite zappers

    :)the circuit here is a redraw of bruce k stenulsons pulsed dc generator which is used for a colliodal silver generator and allso can be used as a parasite zapper.thats the circuit on the right. the circuit on the left is a constant current adaptor for a silver pulsor circuit , which is allso a...
  7. steven2

    Logic IC Tester (4001-11-93-71-81)

    any testor that uses a pc or any ports wouldent be to reliable , if ya pc crashes. its no good to ya. if ya get any viruses then the readings ya get may be no good and the amount of problems ya get with pcs these days . even if ya get a power blackout when ya in the middle of useing a pc to test...
  8. steven2

    Soldering: what am I doing wrong?

    :)intresting, i use a thin low tempiture soldering iron and low tempiture melting piont thin solder wire to go with it  and here i have a small tin of soldering iron tip tinner  that cleans and tins the soldering iron tip , the idea of the low tempiture soldering iron is  so that the heat aint...
  9. steven2

    0 ohm resistor

    :)a super conductor isent that suposed to be zero ohms , and i supose if ya take a resister out ya have no ohms at all so hence the zero ohms hmm ill leave that to audio guru, him exspert  in the electronics feild
  10. steven2

    mini audio transformer

    :)have you tried dicksmiths electronics  and altronics , if ya in perth ereas i have a draw full of transformers  that may meet ya needs .
  11. steven2

    Logic IC Tester (4001-11-93-71-81)

    anytime . the more testers ya have the easyer it is to repair circuits and find faults  .more to come latter
  12. steven2

    Electronic parasite zappers

    :)audio guru thats the idea of science and exsperimentation, to get results  gee i dont think kagaroos would be like a parasite  especially with the damage they do when they hit ya car on the road it can be massive damage  and dangerous to so a zapper about the size of a power station would be...
  13. steven2

    Electronic parasite zappers

    :)
  14. steven2

    Electronic parasite zappers

    :) here is the drawing to show how i got it all into the home made pvc circuit box, the positive and negative input terminals are at the back  and so is the on and off switch and allso the orange input power led
  15. steven2

    Electronic parasite zappers

    :)dispite the circiut which uses 2x 9 volts batteries in sieries  for the 18 volts input , im useing a 12 volts lead acid cell rechargeble battery, not the types from ya car , and its working great , i tried to adjust the trim pot to the axact position as like on the prototype version  that i...
  16. steven2

    Electronic parasite zappers

    :)heres the printed circuit versdion of the circuit in reply number #17
  17. steven2

    Building a flyback driver circuit in a homemade pvc box

    if the pvc is thin enougth you can heat it to soften it easy by holding it over the stove before you stomp on it to flatten it out . if its thicker put it inot a large enougth oven and heat it up till its soft then take it out and clamp it between 2 large flatt peaces of wooden board  tro...
  18. steven2

    Ignition coil driver circuits and experiments

    i wonder if kirlien photography be  like  that or not as it uses high voltage to, ive got the plans to make that to
  19. steven2

    very important

    :)sounds like you want to contain a plasma in a magnetic bottle, are you trying to make a star trek plasma canon ?
  20. steven2

    nearing the 20,000 memebers mark

    :)yea cheers to the electronics lab crew hip hip horay hipp hip horay
Top