Search results

  1. Tha fios agaibh

    Most common failure survey.

    Given the fact that power surges and ps failures happen quite often, I would think processor failures would also be a common problem.
  2. Tha fios agaibh

    Most common failure survey.

    Dave; Are you saying 60-75% IC failure, or Cap failure? Dork seems to be of the position that IC failure is rare, and you disagree? Sorry, my post started with a rough guess that 75% cap failure, but then I ask how often do you end up dead in the water with a failed (unidentified) IC.
  3. Tha fios agaibh

    Most common failure survey.

    Sounds like about 75% of the time you see bad caps? (Aside from fuses or switches going). Reason I ask; I'm at a beginner's level as far as repairing circuit boards. I shy away from complex circuits and ones that have a lot of smd components. My fear is investing the time and money on...
  4. Tha fios agaibh

    I want a badge!

    There's hope for you yet! ...and your almost half way to VIP status.
  5. Tha fios agaibh

    I want a badge!

    That's aye, not "I" Anyway, motion carried.
  6. Tha fios agaibh

    I want a badge!

    Thanks, on behalf of Martaine2005 and myself.
  7. Tha fios agaibh

    Most common failure survey.

    What do you define as old for circuits? Caps >20 years old?
  8. Tha fios agaibh

    I want a badge!

    It's important to laugh. Besides, If it wasn't for losers, we wouldn't have winners.
  9. Tha fios agaibh

    Most common failure survey.

    I know its impossible to say specifically because circuitry and components vary widely, along with the conditions and applications. But, generally speaking; Is their one type of component or failure that you see most often in electronic repairs? Example, leaky electrolytic capacitors...
  10. Tha fios agaibh

    Cable Shielding Question

    Not sure which cable your talking about. Your going to have to work out the details, but the example of the 18pin plug shows wires Blue/white, black/red, white/red, orange/red shielded to pin A which is ground. I would start with a big piece of paper and plot out a sketch of what is where, and...
  11. Tha fios agaibh

    Cable Shielding Question

    That is very cool. I cant answer specifically, but cable shielding should be grounded at the source end. It's best to keep your leads as short as possible, twist the leads to avoid noise and use shrink wrap at the ends. I would guess you would land your shields on the chassis ground where the...
  12. Tha fios agaibh

    I'm New, Please Help Me!!!

    I use an aerosol contact cleaner like; CRC, No-flash or even WD40. PS; What's the urgency? Big party coming up?
  13. Tha fios agaibh

    I want a badge!

    Here is a loser badge, but how do we know your qualified to wear a "Complete Utter Loser" badge?
  14. Tha fios agaibh

    Single phase to three phase motor

    CFM is to Air as Amp Hours is to electricity?
  15. Tha fios agaibh

    Single phase to three phase motor

    Some products have misleading marketing that claims a higher HP to make it sound better. Read the small print and you may find it's actually "peak horse power developed" not true HP. So your 7HP compressor may be driven with a 2HP motor.
  16. Tha fios agaibh

    Single phase to three phase motor

    It's not uncommon to have single phase motors up to 10HP.
  17. Tha fios agaibh

    Rapid response!

    It's refreshing to hear a complement, in a world when most only mention the bad stuff.
  18. Tha fios agaibh

    Multi location thermostat

    Only problem is he might have one of these in the back yard that has dry skin like you. [Moderator Edited Image]
  19. Tha fios agaibh

    Multi location thermostat

    I would move in with Uncle Chris if I was you.
  20. Tha fios agaibh

    Multi location thermostat

    That doesn't solve the problem. That would only make the upstairs roasting hot. I assume it's forced air heat rather than hydronic heat. Closing the registers downstairs and opening the upstairs will compensate for a hot upstairs. You Brits have lots of thermostats, but, the down side to...
Top