Search results

  1. H

    Project Help

    I have some cool circuits that may interest you so i will make several posts instead of one. Maximum attachment size allowed: 1000 KB That really sucks!!!
  2. H

    Data Sheet K818, K819 and BD705, BD708

    Found some schematics that use them as well. http://www.elektronika.lt/schemos/garso/100w/100w.htm http://www.elektronika.lt/schemos/garso/stipr50w1/stipr50w1.htm
  3. H

    Data Sheet K818, K819 and BD705, BD708

    This is from the Russian Link KT818: NF/S-L, 40..90V, 10A, 60W A=40, B=70, Õ=50, â=90V
  4. H

    Data Sheet K818, K819 and BD705, BD708

    Check out this Cross ref PDF SGS_equivalence.pdf
  5. H

    Data Sheet K818, K819 and BD705, BD708

    The Datasheet for BD708 is also on my Datasheet Website. Free membership Required. http://f1.grp.yahoofs.com/v1/
  6. H

    Car stereo amplifier output ratings

    Hmm didn't think about that.
  7. H

    Posts

    Hmm, I think you become light if you break that barrier.
  8. H

    need datasheet for D711

    I will look for the original but for now here is the replacement datasheet. NTE 98 or ECG98 http://www.nteinc.com/specs/10to99/pdf/nte98.pdf nte98_2sd711.pdf
  9. H

    Power supply for AMP in CAR

    The diodes are for spike protection to prevent the transistors from burning when the field colapses in the transformer windings. If you look at a good circuit involving a relay you will see a protection diode across the coil for this reason.
  10. H

    Remote Controlled Lawn Mower

    Mine had a swivel wheel on the back to make it stand up. To control left and right all you had to do is hit the switch and it would put on the break for one wheel. This would turn the lawn mower. If you put on the left break it turns right if you put on the right break it turns left.
  11. H

    Forum at Techlib.com is back

    Everyone Knows this is the Best site!
  12. H

    Power supply for AMP in CAR

    And here is a Schematic from a Pyramid PB300 Amplifier. PB300G_Schematic.pdf
  13. H

    Power supply for AMP in CAR

    Zapco Used no MOSFET in their old Power supplies. Here is their Diagram. The problem with this one is it uses PNP and I already have about 150 Transistors 2N3055. The transformer is special made and hard to find.
  14. H

    about "25w mosfet audio ampfilier"

    Look for any wires that go in to the amplifier. If one shield wire is broken there will be a hum. Also a bad mic will cause a hum. If that does not work then you should look at the capacitors in the power supply section of the amplifier. Also You could spray the controls with some contact...
  15. H

    ORCAD and PS

    ORCAD And PS or Post Script Files What are they and what do I do with these type of files? I downloaded a schematic but, I can't view it.
Top