Search results

Search Forums New Posts
  1. tedstruk

    Low power distance detection

    Ok, I used to play with transistor radios and finally came to the conclusion that in order to find that out that I would have to actually see what a radio frequency looks like... I built a device that I called the GorCapGovernor, that was supposed to make a massing of radio frequencies between a...
  2. tedstruk

    Electric Guitar Guts

    I was a disco rhythm guitarist, and my guitars are stuck with either a really rumbly bass thump thump, or a really tinny twang twang sound. I have tried caps of different sizes in a switched unit, I have tried series and parallel pot wiring, and they all put out sound, but for one reason or...
  3. tedstruk

    Time to start building grow lights!

    Sorry, I can't even afford the parts to build them with.
  4. tedstruk

    1983 Yamaha Venture Royales' TCI Schematic

    I thought I would toss in that I need a schematic for a 1983 Yamaha Venture Royales' TCI made by Hitachi Ltd. So if anyone sees Santa Claus, or any of his freinds family or elves, you might tell them that this is really hard to find. thanks for all your help though! and Happy new year!
  5. tedstruk

    Computer ATX PowerSupply to Lab Bench power supply

    I agree with Analog...a power regulation/ overheat sciruit built in to the PSU, is firing when the draw is switched. A power supply is only a supply, and not an integral working part of the circuitry. There are many different requirements for motherboard power... try looking up the board the...
  6. tedstruk

    PC power supply fail after power a power outage

    Part 4. Testing... Hay Harv.... wanna plug that power supply in for me!
  7. tedstruk

    PC power supply fail after power a power outage

    There! thats better.. now back to my first question.... anything I should know before I hook it up to my o-scope?
  8. tedstruk

    PC power supply fail after power a power outage

    there are 3 sizes of wire on this induction coil, and I forgot where each of them connect.... thats OK, I have ordered a new supply unit(PSU?) this is more like a project now!... can I use telephone wire to rewrap the coil?(wrong gauge is the wrong induction. What if I only need a couple feet...
  9. tedstruk

    PC power supply fail after power a power outage

    Got it out of there! Now how do I replace it!
  10. tedstruk

    PC power supply fail after power a power outage

    The importance of fusing and breakers.... what kind and what size of fuse do I put in a PC power supply?
  11. tedstruk

    Building a regulator/rectifier for a motorcycle

    you should see if you can find a used stator, an r-r, a field coil and a wiring harness off the same model... Much less costly to buy some good used parts, if you just want a ride. Other wise you should look for a professional replacement from one of the many parts warehouses. Just a hint...
  12. tedstruk

    PC power supply fail after power a power outage

    This is a good one!
  13. tedstruk

    PC power supply fail after power a power outage

    melted insulation on this coil?
  14. tedstruk

    PC power supply fail after power a power outage

    sitchyayshun.... The fan stutters on power on, trys to start, no power on, and all the signals are low, 3 red wires read 2 volts, the rest are way down .8 and lower. Whats my problem???
  15. tedstruk

    PC power supply fail after power a power outage

    Is there a switch point that turns it on? never mind... I will just probe araound and see shat I can find!!!
  16. tedstruk

    Supply for 30 LEDs

    MY REPAIR pro EDUCATOR SAID TO consider each individual LED to use a single amp. one amp to fire 1 LED. 30 leds... 30amps
  17. tedstruk

    PC power supply fail after power a power outage

    I have a strong running Dell small factor desktop power supply that went through a power outage and now the fan doesn't run and the PC won't turn on. So I pulled it out, it's a 250w BEST and SATA in a long box... this is my first SATA repair, and as I would assume it is probably not much...
  18. tedstruk

    bridging ribbon wire

    most connections in ribbons are contact, that is if you simply contact a jumper to the exposed wiring it whould work. Problem with this work is that your ribbon wire is not a ribbon wire, its an interface(built in with special signals in each wire) and that means you should consider finding a...
  19. tedstruk

    running the hantek 1008c

    what settings would I need to read an induced current in a magnetic field coil with say a 12v driver.?
  20. tedstruk

    need Schematic for Hitachi Ltd. TCI

    wow what a secret schematic.... I can't find one anywhere.... They made Venture Royales from 83 to 96... I thought they would be easy to find..... If anyone has any idea where I might go hacking to steal one?
Top