Search results

Search Forums New Posts
  1. tedstruk

    Old expired '83 brain needs rework

    Dear blue, A motorcycle is considered antique when it is 35. 83 is antique at 36. when a bike aint starting, and everything checks out except the TCI.... well the TCI is probably in need of a rework. Hey did you know that the TCI is the first 12v ignition that does not require high voltage to...
  2. tedstruk

    Old expired '83 brain needs rework

    yes sweety that is the unit.... It has a nice upside down PC board in it that is hard soldered to the contacts that are sticking out of the case in those plastic connector housings in the picture. When you take the cover off, there is the back side of the oriental electronics engineers...
  3. tedstruk

    LED lamp isnt working, but want to try fix it!

    the lights flashing a bit when you plug it in is a good indication that one of the diodes in the main board is shot. you might need to replace it with one of the same size... if you have a VOM with a diode checker, use it. it will look like a triangle with a bar on one end on the VOM switch...
  4. tedstruk

    EPROMS and transistors

    and then I would say something totally out of it like.... If I want to make a custom eprom, and program my own conditions? Where would I start?
  5. tedstruk

    EPROMS and transistors

    Can you use an eprom and transistors in a motorcycle tci, and how would I program my EPROM for such a tasking?
  6. tedstruk

    Old expired '83 brain needs rework

    I found a TCI schematic... on a web site called SPORTDEVICES. They have a compiler code in c and in asm and the asm in zip for download.
  7. tedstruk

    Old expired '83 brain needs rework

    I am a bad choice for electronics assistant. I can put things together well, and can take them apart equally as well. I have a basic understanding of electronics, circuits and how it all works. I cannot program my own boards yet, but I know some BASIC, and I am internet literate. I have a...
  8. tedstruk

    What rpm must a 24v dc generator turn to produce 24v?

    The data you want is about power, not motor rpms! It must turn a minimum of 1amp per hour, to charge. ie. amperehour? All generators have their own specs..
  9. tedstruk

    Les Paul

    This is what I am picturing in my head.... I think the caps are all wrong, and I need to know which one to use as the HPF and which to use as the LPF Les Paul research gleans me that the circuit is a pickup(transducer) blender with a 3 way toggle 1 for Treble(LPF) and 1 for Rhythm(HPF) and an...
  10. tedstruk

    Les Paul

    about my image that isn't showing.... Well the question I have is about humbucking with a dual tranducer blender, and a homemade EQ using both an HPF and an LPF driven by a 1.2v battery... Do I use a lower cap for higher freqs, and a higher cap for lower freqs or is it viceversa?
  11. tedstruk

    Les Paul

    Les Paul is kind of like the garage hackers idol. After all the main idea was to create a feedback and hum free electric guitar. There are a lot of stories about what LP did when Gibson refused his buzz free electric guitar. One of them is that he took it to Japan and produced millions of...
  12. tedstruk

    mini builtin amp for Bass Guitar

    I am looking for a simple amplification circuit I can build into my new Bass Guitar kit, :D SCHEMATIC AND WIRING DIAGRAM PLEASE! :p It doesn't have much room in the electronics pack so it can't be very large. It doesn't have to be stereo, battery power a plus, 1.5v aaa would be incredible...
  13. tedstruk

    DWD - EP Multiwah footswitch

    found the parralim... I DEDUCE---- :cool: The resistor 474k bridges the circuit between the two transistors.(the parralim) The 474k resistor bridges the collector of the wah circuit transistor, to the base of the tone/volume circuit transistor Pin J to the induction coil(500) to...
  14. tedstruk

    wild semi conductors

    whats with the semi conductor world today? all these kids running around with silicone wafers and plastic saying "Oh, it'll work, it'll work..." Man they lost me on "We need a block diagram" frankly, I used to toss the block diagrams out .... first thing to go in the trash!
  15. tedstruk

    DC induction?

    does a 9v dc current drive the induction coil on stomp boards?
  16. tedstruk

    DWD - EP Multiwah footswitch

    Think I found a hint to the connections... I think this board is wired in parallel.. This would mean that a parallim is active betwwen the circuits in there somewhere... and If I can find the diodes that make the connection, I can work my way out from there.. to eventually reach the pins I...
  17. tedstruk

    For Sale: Sansui SC-5100 good for parts?

    yesturday I gave this junk dealer 5 for this cassette deck recorder:mad:. The motors work, but that's about all. It is a front loading, recorder with MIC inputs. 2 vu meters, and it needs a main drive belt for the cassette, good project for a pro< It lights up, its alive and...
  18. tedstruk

    Amplifier power supply capacitor removal advice needed!

    By the way. The power caps are the easiest part to change on the board...
  19. tedstruk

    DWD - EP Multiwah footswitch

    final schem for original Dowahdiddy? Do you trust my art???? You must ask yourself grasshopper..... "do I trust this idiots art?" heres the art....:) I truely think this is what I have.... I am not joking, and I don't know how I did it. Don't ask, Don't tell.
  20. tedstruk

    DWD - EP Multiwah footswitch

    Bad Tech drawings... I may have my transistors Collector,Emitter,and Base labeled wrong on the schematic. ;) So what are my chances of powering this board with a variable voltage pot, switched to the pedal pot?(bypassing the wah board entirely, just for volume)?
Top