19v 4pin power cable

[[email protected]]

hello, I have a viewsonic N2700w LCD. The power cable that runs from
the VISIONBANK board to power the LCD panel shorted out because the
protective sheath was touching some metal on the inside of the case. I
have linked to some pictures of the problem, and if I was able to get
a replacement power cable, everything would work fine. Is this
something i could make myself? I can't seem to find it anywhere online
(or don't know where to look). Viewsonic wants too much money to
repair the thing, when it was their fault during production for having
the sheath of the cable pressed into a metal corner, causing the
problem. Anyhow, here's some pics... thanks for any suggestions!

Todd
[email protected]

http://www.thejet.net/viewsonic/cable_needed_1.jpg
http://www.thejet.net/viewsonic/cable_needed_2.jpg
http://www.thejet.net/viewsonic/cable_needed_3.jpg
http://www.thejet.net/viewsonic/cable_needed_4.jpg

 

[mrsirpantsalot]

hello, I have a viewsonic N2700w LCD. The power cable that runs from
the VISIONBANK board to power the LCD panel shorted out because the
protective sheath was touching some metal on the inside of the case. I
have linked to some pictures of the problem, and if I was able to get
a replacement power cable, everything would work fine. Is this
something i could make myself? I can't seem to find it anywhere online
(or don't know where to look). Viewsonic wants too much money to
repair the thing, when it was their fault during production for having
the sheath of the cable pressed into a metal corner, causing the
problem. Anyhow, here's some pics... thanks for any suggestions!

Todd
[email protected]

http://www.thejet.net/viewsonic/cab...//www.thejet.net/viewsonic/cable_needed_4.jpg

OMFG I have the same problem... I mean exactly, I look at your
pictures and its the same problem, and I paid good money for this
moniter, if anyone knows how to fix this email me at
[email protected] .