Assigning Zone Definitions

[Joe]

I moved into a house with a Moose Z900 and it has 6 zones. I need to
reassign 2 of the zones that are atached to motion sensors so that the
system recognizes them as interior zones and will turn them off when I
press the key that shunts interior defined zones. Make sense?

I have the Specifications and Instructions Manual for the system and I
realize that this has to be completed through installer level
programming. I know how to do this, but the manual states that I need
to refer to the Zone Planning Guide for the definitions. I do not
have the Zone Planning Guide.

Does anyone know where I can get this guide or know the definitions
for my particular model?

Thanks!

 

[Guest]

YES, Do you know the installers code.
http://www.bass-home.com/Manuals/moose/manuals.cfm

There a lot of us here that can walk you through it.
It would be nice for a novice to have a pin hole keypad card.
I could scan one and e-mail it to you.

 

[thesatguy]

instant=65
delay=64
interior=80

YES, Do you know the installers code.
http://www.bass-home.com/Manuals/moose/manuals.cfm

There a lot of us here that can walk you through it.
It would be nice for a novice to have a pin hole keypad card.
I could scan one and e-mail it to you.