flyback driver circiuts .are intresting and im looking for any ideas to the use of these flyback, high voltage outputs for high voltage capacitor chargeing, so far im still in the exsperimental stages. and hope to get it right sooner or latter ive been collecting them and sketching them and drawing my own pinouts illiustrations as simple as possible nothing like it on the net.
Plasma tube exsperiments is another thing ive conducted. with the use of the hv output from a flyback and ive put together a simple hv modified hv pollarity indicater that runs off the hv out of a flyback transformer and have included 2x 5mm leds to indicate hv voltage .
As for the plasma tube exsperiments run from the flyback transformer i was able to allso get all kinds of wierd arcs that i can freeze into shape like sawtooth shape and others includeing sine wave shape .and some unknown shapes. the plasma tube are made from photo flash tubes and this particular flyback i have no idea but it was linked to a flyback and thus ill call it one to .
In one of my attempts to charge a photo flash capacitor i was able to store some charge ,enougth to create some sparks and dispite not useing a hv flyback transformer at that time i researching on trying it with the high voltage tv flyback , allthough the ones with disk shapes are few and far between in australia.
I found the normal high voltage flybacks to be just as good and i even design my own high voltage flyback driver circiut unit houseing from pvc pipes and are still going strong . each flyback driver circiut i biuld are protoypes and the ones with good hv tripplers really pac a punch .
Each unit i biuld i make them as simple as possible to fix , and with this simple modified hv polarity indicater circiut i was able to get increased ion wind output plenty blue as it seems to be [email protected]
Plasma tube exsperiments is another thing ive conducted. with the use of the hv output from a flyback and ive put together a simple hv modified hv pollarity indicater that runs off the hv out of a flyback transformer and have included 2x 5mm leds to indicate hv voltage .
As for the plasma tube exsperiments run from the flyback transformer i was able to allso get all kinds of wierd arcs that i can freeze into shape like sawtooth shape and others includeing sine wave shape .and some unknown shapes. the plasma tube are made from photo flash tubes and this particular flyback i have no idea but it was linked to a flyback and thus ill call it one to .
In one of my attempts to charge a photo flash capacitor i was able to store some charge ,enougth to create some sparks and dispite not useing a hv flyback transformer at that time i researching on trying it with the high voltage tv flyback , allthough the ones with disk shapes are few and far between in australia.
I found the normal high voltage flybacks to be just as good and i even design my own high voltage flyback driver circiut unit houseing from pvc pipes and are still going strong . each flyback driver circiut i biuld are protoypes and the ones with good hv tripplers really pac a punch .
Each unit i biuld i make them as simple as possible to fix , and with this simple modified hv polarity indicater circiut i was able to get increased ion wind output plenty blue as it seems to be [email protected]
Last edited by a moderator:
from steven, well ive got to try an exsperiment with one of my many flyback drivers. starting with the multi flyback driver unit with 2 flyback transformers in it and a rotary switch to sellect iether one of the 2 flyback transformers, anyhow i biult a lifter to try out , but i think the gauge wire was a little to thick but the wire sure pulls flatt to the table and a tiny seaseme seed from a hamburger bun, was being pushed away from the wire and pulled back to near it when i was makeing adjustments, this could be the begining of a new lifter bun, if thats all i can get from a tiny seed and not the lifter. it seems the seed was more efected than the lifter, from the high voltage flowing through the wires. ill try thinner wire and may even try a smaller lifter, im biulding another smaller lifter to try but its the size of an american silver dollar, the seaseme see 
