Looking for a handheld LCR meter

[newtype]

hi, I'm looking for a handheld LCR meter.
How's the elenco LCR-1810 ?
Something under $125.00 would be great.

thanks

 

[Joe McElvenney]

Hi,

hi, I'm looking for a handheld LCR meter.
How's the elenco LCR-1810 ?
Something under $125.00 would be great.

How about -

http://www.peakelec.co.uk/


Cheers - Joe

 

[newtype]

Hi,

How about - , http://www.peakelec.co.uk
Cheers - Joe

Hi Joe, bundle peak that looks pretty good. I've been searching
and found the tecpel lcr-612, the inductance is down to 0.1uH,
good for tinkering rf circuits. It's a bit more than what I
want to spend. I hope the price will come down for x-mas.

thanks

 

[newtype]

Hi Joe, bundle peak that looks pretty good. I've been searching
and found the tecpel lcr-612, the inductance is down to 0.1uH,
good for tinkering rf circuits. It's a bit more than what I
want to spend. I hope the price will come down for x-mas.

thanks

I think that the Extech 380193 sold in the US by Allied,
is the same as the TecPel lcd-612. They both look exactly the same.
Can anyone confirm that they are the same meter?

 

[Spehro Pefhany]

hi, I'm looking for a handheld LCR meter.
How's the elenco LCR-1810 ?
Something under $125.00 would be great.

thanks

Brief commercial note:

I have a bunch of new LC meters (no R).
Resolution is 1uH/1pF, which might be a bit coarse for your RF.

2/20/300mH/2H/20H, 2nF/20nF/200nF/200uF
http://www.trexon.com/lcmeter.jpg
http://www.trexon.com/LCmeter_manual.pdf

About half your target price, including US shipping.


Best regards,
Spehro Pefhany

 

[newtype]

Brief commercial note:
I have a bunch of new LC meters (no R).
Resolution is 1uH/1pF, which might be a bit coarse for your RF.

2/20/300mH/2H/20H, 2nF/20nF/200nF/200uF
http://www.trexon.com/lcmeter.jpg
http://www.trexon.com/LCmeter_manual.pdf
About half your target price, including US shipping.

Best regards,
Spehro Pefhany

I have some rf inductors that should be .68uH ?
The TecPel can measure 0.1 uH. I read the Extech man and it says 2000uH ?
There should be a min and max , and I can't tell from the Extech man.

thanks

 

[Spehro Pefhany]

I have some rf inductors that should be .68uH ?
The TecPel can measure 0.1 uH.

Resolution, I assume.

I read the Extech man and it says 2000uH ?

If it's 3-1/2 digits, then 1999 full scale => 1uH resolution.

There should be a min and max , and I can't tell from the Extech man.

thanks

You could always get something like this:
http://cp.literature.agilent.com/litweb/pdf/5963-5395E.pdf

But it's a mite more expensive than the target range, and at 16kg, not
handheld for very long.


Best regards,
Spehro Pefhany