replace RF remote missing

[leloga]

Hello everyone,

I hope you're all doing well.

I have a Unison Research Unico Pre preamplifier, which comes with an RF remote control featuring two buttons to adjust the volume (up and down).

Unfortunately, I don't have the remote control anymore.

I'm looking for a replacement solution.

The Unison Research distributor in France told me that the RF remote is no longer available for purchase.

I received partial information from someone at Unison Research, but I'm still trying to figure out how to get a remote working with my preamp.

I've found the RF receiver board inside the preamp.

According to the manufacturer, there is a button on the board that switches the receiver into rolling code mode, allowing the remote to be paired.

My main question:​

Without the original remote, is it possible to pair any RF remote control?

I tried using a 433.92 MHz garage door remote, but it didn't work.

For reference, when I press the red button on the receiver, a red LED lights up.
I assume this means the receiver is in pairing mode.

Here’s a photo of the receiver module from a similar device I found online:
https://i.ibb.co/0pCxPvVF/DSC00044-remote-unson-research.jpg

It's the same module in my preamp, but I couldn’t take a picture because the board is upside down and hard to access.

If anyone has an idea of how to find a compatible remote, that would be amazing!

Manufacturer’s response regarding the remote:​

"Radio remote controls are rolling code and are paired by pressing the red button on the receiver board."

So, this works if you have the original remote... But since I don’t, and I can’t buy one anymore, what can I use instead?

Thanks a lot for your help!

 

[Martaine2005]

You could try a universal remote control and try pairing that.
You could also try every other remote control you have around the house.
Failing that, the receiver pcb could potentially be changed for a different frequency complete with new RF transmitter.
It appears to interface with five pins to the main board.

 

[Martaine2005]

Try Here

 

[ahsrabrifat]

Hello everyone,

I hope you're all doing well.

I have a Unison Research Unico Pre preamplifier, which comes with an RF remote control featuring two buttons to adjust the volume (up and down).

Unfortunately, I don't have the remote control anymore.

I'm looking for a replacement solution.

The Unison Research distributor in France told me that the RF remote is no longer available for purchase.

I received partial information from someone at Unison Research, but I'm still trying to figure out how to get a remote working with my preamp.

I've found the RF receiver board inside the preamp.

According to the manufacturer, there is a button on the board that switches the receiver into rolling code mode, allowing the remote to be paired.

My main question:​

Without the original remote, is it possible to pair any RF remote control?

I tried using a 433.92 MHz garage door remote, but it didn't work.

For reference, when I press the red button on the receiver, a red LED lights up.
I assume this means the receiver is in pairing mode.

Here’s a photo of the receiver module from a similar device I found online:
https://i.ibb.co/0pCxPvVF/DSC00044-remote-unson-research.jpg

It's the same module in my preamp, but I couldn’t take a picture because the board is upside down and hard to access.

If anyone has an idea of how to find a compatible remote, that would be amazing!

Manufacturer’s response regarding the remote:​

So, this works if you have the original remote... But since I don’t, and I can’t buy one anymore, what can I use instead?

Thanks a lot for your help!

If you can determine the chipset used in the receiver, it may help in finding a compatible transmitter.

 

[leloga]

If you can determine the chipset used in the receiver, it may help in finding a compatible transmitter.

Thanks ahsrabrifat

There is a RX4CCVA1 chipset but does it help ?

 

[Delta Prime]

A wooden RF remote control

https://www.audiogon.com/listings/unison-research-unico-original-rf-remote

 

[leloga]

Thank yo very much

Unfortunately the ad is classified and I don't find any way Tu contact the seller imissaz

All the best