Latest activity
-
Delta Prime reacted to crutschow's post in the thread Buck converter calculation does not match with LTspice results with
Like.
So everything looks ok now? Note that the high frequency oscillations you are seeing at the output of the switch is due to the stray... -
baldguyfromblackpool posted the thread Architecture of mass produced cheap welding set in Troubleshooting and Repair.I'm no longer trying to fix this Parkside PISG80A1 inverter stick welder because the cost of a brand new replacement coupled with the... -
Rryanwalker21 replied to the thread 3-phase 380V inverter with EGS031 and EGP3000W boards.Interesting project—those EGS031/EGP3000W kits do pop up a lot, but you’re right, there’s very little real-world build info out there...
-
Delta Prime reacted to Martaine2005's post in the thread The position reading from the driver keeps jumping. with Like.
I’m no expert by any stretch of the imagination but I would first try a rigid coupler rather than a flexible one.
-
DDanieldsouza posted the thread First post: Tips for stabilizing HC-SR04 ultrasonic readings in Sensors and Actuators.Hi everyone, new to the forum! I’ve been working with the HC-SR04 ultrasonic sensor for a small robotics project and wanted to share a...
-
Ddanadak replied to the thread BLUETOOTH ANTENNA.Typically the BT chip datasheets have recommended antenna interface design layouts. If all they give you is S parameters ...
-
Ddanadak replied to the thread Farnell Catalogues - 2005 or 2006.One possibility : https://chatgpt.com/s/t_69e8ad10dc548191bb263d2433eaa45b
-
BILLGR72 replied to the thread BLUETOOTH ANTENNA.Thank you -
ZZEDCO replied to the thread D&B Audioteknik D12 - Power supply relay issue.tested solution!!!
-
How are we supposed to help when you don't show a schematic of your circuit?
-
crutschow replied to the thread Buck converter calculation does not match with LTspice results.So everything looks ok now? Note that the high frequency oscillations you are seeing at the output of the switch is due to the stray... -
KKrishna Sankhyan replied to the thread Which MCU do you prefer — ESP32 / STM32 / RP2040 / Arduino?.ESP32 for most projects (WiFi + Bluetooth), STM32 for performance, RP2040 for flexibility, Arduino for beginners 👍
-
Martaine2005 replied to the thread BLUETOOTH ANTENNA.I think that it’s possible to add an external antenna. Cut the PCB antenna traces to eliminate it and use either a SMA or U.FL... -
Electric1 reacted to crutschow's post in the thread Buck converter calculation does not match with LTspice results with Like.
What errors? File below:
-
Electric1 replied to the thread Buck converter calculation does not match with LTspice results.I was probing at different place sorry my mistake
-
