Latest activity
-
KKrishna Sankhyan replied to the thread Buck converter calculation does not match with LTspice results.Probably due to non-ideal parts đź‘Ť Check ESR, inductor DCR, diode/MOSFET drops, and CCM vs DCM.
-
Ddanadak replied to the thread Max Current and Shorted Current.Of course there are the parts that use foldback current limiting to manage that. As well as thermal limiting monitoring die temp as well.
-
KKrishna Sankhyan replied to the thread Max Current and Shorted Current.Max current is what the device can safely supply under normal conditions, while short-circuit current is the much higher current that...
-
Ddanadak replied to the thread JK Flip-Flop Toggles Twice from One Button Press.RC approaches, without using a Schmidt trigger gate or comparator with hysteresis can generate problems due to excessive rise and fall...
-
-
CCrafts4Me replied to the thread revolving chandelier with a way to plug in led strips.i am sorry i am coming back to this i have my crown, 2 feet x 2 feet lit with led lights rgb strips and individual mini lamps all 12v...
-
Delta Prime replied to the thread M-audio BX5 buzzing problem.Correction:600 to 1.2kHz. -
Delta Prime replied to the thread JK Flip-Flop Toggles Twice from One Button Press.Could you show us a schematic of your circuit, please?
-
Eeva_402 posted the thread JK Flip-Flop Toggles Twice from One Button Press in Microcontrollers, Programming and IoT.Hi everyone, I’m using a JK flip-flop for a simple state control circuit. Pressing the push button should toggle once, but sometimes...
-
Delta Prime replied to the thread M-audio BX5 buzzing problem.Are any of these the one you’re working on? M-audio BX5 D2 M-audio BX5 D3 M-audio BX5 Carbon Black How old is your unit, high...
-
-
SDisclaimer: I’ve already fixed one of these speakers (it had a really loud buzz) by replacing the 2 bad 4700uf caps. Now my other one...
-
-
crutschow replied to the thread Max Current and Shorted Current.The shorted current will be slightly larger than the regulated voltage maximum current, due to the low gain of the current limit... -
Thank you -
Typically the BT chip datasheets have recommended antenna interface design layouts. If all they give you is S parameters ...
-
Thank you
-
I think that it’s possible to add an external antenna. Cut the PCB antenna traces to eliminate it and use either a SMA or U.FL...
